Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: FLY DRAGON CONSTRUCTION INC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of FLY DRAGON CONSTRUCTION INC in 424 NASH ROAD, NEW BEDFORD, MA 02746 (NAICS 238110). OSHA activity number 347133316.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch FLY Dragon Construction INC — free Get an email when a new federal OSHA severe-injury report for FLY Dragon Construction INC is published. One employer, no account, unsubscribe in one click.
Site address
424 NASH ROAD
City
NEW BEDFORD
State
MA
ZIP
02746
Mailing
50 PHILLIPS STREET, QUINCY, MA 02170
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238110
Employees
4
Ownership type
A

8 citations on file for this inspection.

1926.25 A

Serious Gravity 10 1 instance 4 exposed
Issued
May 16, 2024
Penalty
Initial $4,839 · Current $3,000 Reduced
29 CFR  1926.25(a):During the course of construction, alteration, or repairs,  debris was not kept cleared from work areas, passageways, and stairs, in and around buildings or other structures:  Location: Job site  On November 22, 2023, workers were exposed to slips, trips, falls and puncture wounds due to the work areas and passageways around the work areas not being cleared of construction debris.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $4839

1926.102 A01

Serious Gravity 10 1 instance 1 exposed
Issued
May 16, 2024
Abate by
May 24, 2024
Penalty
Initial $4,839 · Current $2,000 Reduced
29 CFR  1926.102(a)(1):Employees were not provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical, or radiation agents:  Location: Job site  On November 22, 2023, a worker was using a chop saw with an abrasive wheel to cut rebar without wearing eye and face protection.
Recent events (2)
  • — I (S) $2000
  • — Z (S) $4839

1926.300 A

Serious Gravity 10 1 instance 4 exposed
Issued
May 16, 2024
Abate by
May 24, 2024
Penalty
Initial $4,839 · Current $3,000 Reduced
29 CFR  1926.300(a):Hand tool(s), power tool(s) or similar equipment were not maintained in a safe condition:  Location: Job Site  Instance 1: On or about November 20, 2023, a Skill Worm Drive circular saw, with the trigger tied back with orange nylon rope being used as a makeshift table saw, was affixed under a sheet of plywood with its blade exposed from under the sheet of plywood, exposing workers to laceration and amputation injuries.    Instance 2: On or about November 22, 2023, a DeWalt Model DW713 miter saw used to cut wood was on a sheet of plywood supported by makeshift wooden sawhorses was not mounted to the sheet of plywood, exposing workers to laceration and amputation injuries.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $4839

1926.352 A

Serious Gravity 10 1 instance 4 exposed
Issued
May 16, 2024
Abate by
May 24, 2024
Penalty
Initial $4,839 · Current $2,000 Reduced
29 CFR  1926.352(a):Movable fire hazards in the vicinity of unmovable objects that were to be welded on, cut or heated were not taken to a safe place, or otherwise protected:  Location: Job site  On November 22, 2023, a worker was using chop saw to cut rebar near a propane powered forklift exposing the worker to potential explosion and fire hazards.
Recent events (2)
  • — I (S) $2000
  • — Z (S) $4839

1926.403 B01

Serious Gravity 5 1 instance 4 exposed
Issued
May 16, 2024
Abate by
May 24, 2024
Penalty
Initial $3,457 · Current $2,000 Reduced
29 CFR  1926.403(b)(1):Employer did not ensure that electrical equipment is free from recognized hazards that are likely to cause death or serious physical harm to employees:    Location: Job site  On November 22, 2023, workers were exposed to electrical shock and electrocution due to frayed wiring hanging from a ceiling and exposed wires attached to an electrical outlet.
Recent events (2)
  • — I (S) $2000
  • — Z (S) $3457

1926.405 B02

Serious Gravity 5 1 instance 4 exposed
Issued
May 16, 2024
Abate by
May 24, 2024
Penalty
Initial $3,457 · Current $2,000 Reduced
29 CFR  1926.405(b)(2):In an energized installation, each outlet box did not have a cover, faceplate, or fixture canopy.  Location: Job site  On November 22, 2023, an electrical outlet and light switch affixed to a makeshift plywood table did not have faceplates on them exposing the employees to electrical shock and electrocution hazards.
Recent events (2)
  • — I (S) $2000
  • — Z (S) $3457

1926.501 B09 II

Serious Gravity 10 1 instance 4 exposed
Issued
May 16, 2024
Abate by
May 24, 2024
Penalty
Initial $4,839 · Current $3,000 Reduced
29 CFR  1926.501(b)(9)(ii):Each employee reaching more than 10 inches (25 cm) below the level of the walking/working surface, on which he/she was working, was not protected from falling by a guardrail system, safety net system, or personal fall arrest system.  Location Job Site  On November 22, 2023, workers were exposed to falls exceeding 4' while reaching over the edges of a 140' L X 70'W X 49"D hole that was not protected by a guardrail system.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $4839

1926.701 B

Serious Gravity 10 1 instance 4 exposed
Issued
May 16, 2024
Abate by
May 24, 2024
Penalty
Initial $4,839 · Current $3,000 Reduced
29 CFR  1926.701(b):All protruding reinforcing steel, onto and/or into which employees could fall, was not guarded to eliminate the hazard of impalement:  Location: Job site  On November 22, 2023, workers were exposed to impalement from protruding rebar that was not guarded at the end by caps while working around the edges and inside a 140' L X 70' W X 49" D hole.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $4839

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347133316.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.