FORT WASHINGTON, PA —
OSHA Inspection: GRANITE GALLERIA FABRICATION INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of GRANITE GALLERIA FABRICATION INC. in 425 DELAWARE DRIVE SUITE C, FORT WASHINGTON, PA 19034 (NAICS 327991). OSHA activity number 347135592.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GRANITE GALLERIA FABRICATION INC.
- Site address
- 425 DELAWARE DRIVE SUITE C
- City
- FORT WASHINGTON
- State
- PA
- ZIP
- 19034
- Mailing
- 425 DELAWARE DRIVE SUITE C, FORT WASHINGTON, PA 19034
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327991
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.1200 E01
- Issued
- May 21, 2024
- Abate by
- Jun 10, 2024
- Penalty
- Initial $2,074 · Current $1,250 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program that included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii): a) 425 Delaware Dr Suite C, Fort Washington, PA 19034, in Fabrication Suite - On or about November 30, 2023, employees used hazardous chemicals including but not limited to Surface Bonder Ultra, a respiratory irritant, for use as an adhesive for stone products to seal holes and the employer did not develop and implement a written hazard communication program. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $1250
- — Z (S) $2074
1910.1200 E01 I
- Issued
- May 21, 2024
- Abate by
- Jun 10, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1)(i): The employer did not compile a list of the hazardous chemicals known to be present at the workplace. a) 425 Delaware Dr Suite C, Fort Washington, PA 19034, in Fabrication Suite - On or about November 30, 2023, employees used hazardous chemicals including but not limited to Surface Bonder Ultra, a respiratory irritant, for use as an adhesive for stone products to seal holes and the employer did not develop a list of hazardous chemicals known to be present. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 G08
- Issued
- May 21, 2024
- Abate by
- Jun 10, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical. a) 425 Delaware Dr Suite C, Fort Washington, PA 19034, in Fabrication Suite - On or about November 30, 2023, the employer did not maintain copies of the required safety data sheets for hazardous chemicals used within the workplace. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 K06
- Issued
- May 21, 2024
- Abate by
- Jun 10, 2024
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer: a) Fabrication area - On or about November 30, 2023 employees using employer provided optional use filtering facepieces in the cut stone countertop fabrication area were not provided training on the information within Appendix D as required by this section. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 327991)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347135592.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.