PILOT POINT, TX —
OSHA Inspection: UNIQUE WOODWORKS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of UNIQUE WOODWORKS, INC. in 1024 N HIGHWAY 377 SUITE B, PILOT POINT, TX 76258 (NAICS 321999). OSHA activity number 347156408.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- UNIQUE WOODWORKS, INC.
- Site address
- 1024 N HIGHWAY 377 SUITE B
- City
- PILOT POINT
- State
- TX
- ZIP
- 76258
- Mailing
- 1024 N HIGHWAY 377 SUITE B, PILOT POINT, TX 76258
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321999
- Employees
- 11
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.219 D01
- Issued
- Dec 18, 2023
- Penalty
- Initial $2,277 · Current $1,366 Reduced
General-duty citation text
29 CFR 1910.219(d)(1):Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o). On or about December 11, 2023, and times prior thereto, south side of the shop area, the employer did not ensure the pulley of the Baldor motor chop saw machine was guarded when used exposing employees to caught-in hazards.
Recent events (2)
- — I (S) $1366.2
- — Z (S) $2277
1910.219 E01 I
- Issued
- Dec 18, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o). On or about December 11, 2023, and times prior thereto, south side of the shop area, the employer did not ensure the belt of the Baldor motor and chop saw machine was guarded when used exposing employees to caught-in hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.22 D01
- Issued
- Dec 18, 2023
- Penalty
- Initial $426 · Current $256 Reduced
General-duty citation text
29 CFR 1910.22(d)(1): The employer did not ensure that walking-working surfaces are inspected, regularly and as necessary, and maintained in a safe condition. On or about December 11, 2023, and times prior thereto, the employer stored materials above the tool room and break room areas where employees frequently work and failed to have a load rating or a sign indicating the approved load limit exposing employees to struck-by or crushed-by hazards.
Recent events (2)
- — I (O) $255.6
- — Z (O) $426
1910.157 C01
- Issued
- Dec 18, 2023
- Penalty
- Initial $426 · Current $256 Reduced
General-duty citation text
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries. On or about December 11, 2023, and times prior thereto, the employer did not ensure fire extinguishers were identified with a fire extinguisher sign and ready accessible for employees exposing to fire and smoke hazards. a) In the grinding room, the fire extinguisher sign was missing, b) Outside the tool room, the fire extinguisher sign was missing.
Recent events (2)
- — I (O) $255.6
- — Z (O) $426
1910.305 B01
- Issued
- Dec 18, 2023
- Penalty
- Initial $501 · Current $301 Reduced
General-duty citation text
29 CFR 1910.305(b)(1): Unused openings in boxes, cabinets, or fittings were not effectively closed. On or about December 11, 2023, and times prior thereto, the employer had knockouts located on electrical equipment and failed to have them effectively closed exposing employees to electrical hazards. a) Power box that energize the grinding machine missing knockout plugs, b) Control panel box missing knockout plugs.
Recent events (2)
- — I (O) $300.6
- — Z (O) $501
1910.305 G01 IV A
- Issued
- Dec 18, 2023
- Penalty
- Initial $426 · Current $256 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure. On or about December 11, 2023, and times prior thereto, an extension cord, zip tied around a metal conduit, was used as permanent wiring to energize the ELGI air compressor, exposing employees to electrical shock hazards.
Recent events (2)
- — I (O) $255.6
- — Z (O) $426
More inspections in this industry (NAICS 321999)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347156408.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.