Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BOYD CORPORATION

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of BOYD CORPORATION in 325 JEANETTE E. BARRETT INDUSTRIAL BLVD, WETUMPKA, AL 36092 (NAICS 333243). OSHA activity number 347163453.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Boyd Corporation — free Get an email when a new federal OSHA severe-injury report for Boyd Corporation is published. One employer, no account, unsubscribe in one click.
Establishment
BOYD CORPORATION
Site address
325 JEANETTE E. BARRETT INDUSTRIAL BLVD
City
WETUMPKA
State
AL
ZIP
36092
Mailing
325 JEANETTE E. BARRETT INDUSTRIAL BLVD, WETUMPKA, AL 36092
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333243
Employees
45
Ownership type
A

4 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 22, 2024
Abate by
Feb 5, 2024
Penalty
Initial $10,775 · Current $6,465 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  a) At 325 Jeanette E. Barrett Industrial Blvd, Wetumpka, AL. ; On or about December 12, 2023 and at times prior, the employer exposed employees performing preventative maintenance, cleaning, and changing drill bits on the Mazak VCN-510C S/N 176609 to amputation hazards in that the employer failed to develop, document, and utilize energy control procedures.
Recent events (2)
  • — I (S) $6465
  • — Z (S) $10775

1910.147 D04 I

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 22, 2024
Abate by
Feb 5, 2024
Penalty
Initial $0 · Current $0
29 CFR  1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees:  a) At 325 Jeanette E. Barrett Industrial Blvd, Wetumpka, AL. ; On or about December 12, 2023, and at times prior thereto, employees were required to enter the Mazak VCN-510C S/N 176609 to clean and do preventative maintenance without affixing a lock to the electrical energy
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 C05 II

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 22, 2024
Abate by
Feb 5, 2024
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(5)(ii): Lockout/Tagout devices shall be the only devices used for controlling energy, shall not be used for other purposes and meet the requirements of 1910.147(c)(5)(ii) [A] thru 1910.147(c)(5)(ii)[D]  a) At 325 Jeanette E. Barrett Industrial Blvd, Wetumpka, AL. ; On or about December 12, 2023 and at times prior, the employer exposed employees to amputation hazards in that the locks used for lockout/tagout were used and did not identify the employee who applied the lock.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.212 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Jan 22, 2024
Penalty
Initial $10,775 · Current $6,465 Reduced
29 CFR  1910.212(a)(1):Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks.   a) At 325 Jeanette E. Barrett Industrial Blvd, Wetumpka, AL.; On or about December 12, 2023, and at times prior, the employer exposed employees to amputation hazards in that employees were allowed to bypass the interlock, open the door, to the Mazak VCN-510C S/N 176609 exposing the rotating face mill of the machine while it is in operation.
Recent events (2)
  • — I (S) $6465
  • — Z (S) $10775

View Boyd Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347163453.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.