Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BLANCA FORESTRY PRODUCTS, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of BLANCA FORESTRY PRODUCTS, INC. in 29492 COUNTY ROAD 12, BLANCA, CO 81123 (NAICS 321113). OSHA activity number 347174153.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Blanca Forestry Products, INC. — free Get an email when a new federal OSHA severe-injury report for Blanca Forestry Products, INC. is published. One employer, no account, unsubscribe in one click.
Site address
29492 COUNTY ROAD 12
City
BLANCA
State
CO
ZIP
81123
Mailing
29492 COUNTY ROAD 12, BLANCA, CO 81123
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321113
Employees
80
Ownership type
A

5 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 10 1 instance 5 exposed
Issued
May 28, 2024
Abate by
Jun 26, 2024
Penalty
Initial $11,292 · Current $6,775 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    a) On or about December 18, 2023, and at times prior, the employer did not ensure that hazardous energy control procedures were utilized when employees were performing servicing and maintenance on hydraulic pins on the box chain conveyor on the log deck where the unexpected energizing, startup or release of stored energy could occur and cause injury.  This condition exposed employees to caught-in and crushing hazards while performing servicing and maintenance on hydraulic pins located on the box conveyor.
Recent events (2)
  • — I (S) $6775
  • — Z (S) $11292

1910.147 C07 I

Other-than-serious Gravity 10 1 instance 4 exposed
Issued
May 28, 2024
Abate by
Jun 26, 2024
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees that employees acquired the knowledge and skills required for the safe application, usage and removal of energy controls:  a)  On or about December 18, 2023, and at times prior, the employer did not provide adequate training on the hazardous energy control program to employees performing servicing and maintenance on equipment to ensure that the program was understood by employees.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.147 C06 I

Serious Gravity 5 1 instance 4 exposed
Issued
May 28, 2024
Abate by
Jun 26, 2024
Penalty
Initial $6,453 · Current $3,872 Reduced
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:  a)  On or about December 18, 2023, and at times prior, the employer did not conduct a periodic inspection of its energy control procedure at least annually to ensure that the procedure was being followed and the requirements of the standard were being met.
Recent events (2)
  • — I (S) $3872
  • — Z (S) $6453

1910.265 C18 I

Serious Gravity 10 1 instance 1 exposed
Issued
May 28, 2024
Abate by
Jun 26, 2024
Penalty
Initial $11,292 · Current $6,775 Reduced
29 CFR 1910.265(c)(18)(i): Construction, operation, and maintenance of conveyors were not in accordance with American National Standard B20.1-1957, which is incorporated by reference as specified in Sec. 1910.6:  a) On or about December 18, 2023, and at times prior, an employee was exposed to caught-in and crushing hazards from an unguarded chain conveyor while attempting to dislodge stuck logs using a pull tool.
Recent events (2)
  • — I (S) $6775
  • — Z (S) $11292

1904.41 A01

Other-than-serious 1 instance 80 exposed
Issued
May 28, 2024
Abate by
Jun 26, 2024
Penalty
Initial $1,613 · Current $968 Reduced
29 CFR 1904.41(a)(1)(i): The employer did not electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee establishment while having had 20-249 employees at any time during the previous calendar year, and while having an establishment classified in an industry listed in appendix A to subpart E no later than the year after the calendar year covered by the form:  a) On or about April 26, 2024, and at times prior, the employer with more than 20 employees during the previous calendar year, and who's establishment was listed in Appendix A to subpart E did not electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA no later than March 2, 2024.
Recent events (2)
  • — I (O) $968
  • — Z (O) $1613

View Blanca Forestry Products, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347174153.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.