IDAHO FALLS, ID —
OSHA Inspection: INTERMOUNTAIN PACKING, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of INTERMOUNTAIN PACKING, LLC in 625 PANCHERI DR, IDAHO FALLS, ID 83401 (NAICS 311612). OSHA activity number 347174807.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- INTERMOUNTAIN PACKING, LLC
- Site address
- 625 PANCHERI DR
- City
- IDAHO FALLS
- State
- ID
- ZIP
- 83401
- Mailing
- 1096 EAST IONA ROAD, IDAHO FALLS, ID 83401
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311612
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
5(a)(1)
- Issued
- May 24, 2024
- Abate by
- Jun 6, 2024
- Penalty
- Initial $8,296 · Current $8,296
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees where employees were exposed to fall hazards when elevated in a man-basket attached to the forks of a powered industrial truck: a) Cold Storage Warehouse: On December 14, 2023, and at times prior to; employees were exposed to falls from approximately 20 feet to the concrete ground below while elevated in a man-basket, which had visible structural damage to the welds, attached to the forks of the Nissan Forklift, Model Number MCT1B2L25S. Note* Abatement certification is required for this item.
Recent events (1)
- — Z (S) $8296
1910.178 A04
- Issued
- May 24, 2024
- Abate by
- Jun 6, 2024
- Penalty
- Initial $6,222 · Current $6,222
General-duty citation text
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: a) Cold Storage Warehouse: On December 14, 2023, and at times prior to; employees worked out of a man-basket attached to a Nissan Forklift, Model Number MCT1B2L25S. The front-end attachment had rust damage on the corner welds, which could affect the structural integrity of the man-basket. Note* Abatement certification is required for this item.
Recent events (1)
- — Z (S) $6222
1910.178 A05
- Issued
- May 24, 2024
- Abate by
- Jun 6, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(5): The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered: a) Cold Storage Warehouse: On December 14, 2023 and at times prior to; employees worked out of a man-basket attached to a Nissan Forklift, Model Number MCT1B2L25S. The front-end attachment had rust damage on the corner welds, which could affect the structural integrity of the man-basket. Note* Abatement certification is required for this item.
Recent events (1)
- — Z (S) $0
1910.178 L04 III
- Issued
- May 24, 2024
- Abate by
- Jun 6, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) Cold Storage Warehouse: On December 14, 2023 and at times prior to; an employee operates forklifts to store, organize, and retrieve frozen meats and ice-cream from a tiered racking system. Training had been expired for approximately six months. Note* Abatement certification is required for this item.
Recent events (1)
- — Z (O) $0
More inspections in this industry (NAICS 311612)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347174807.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.