KANSAS CITY, KS —
OSHA Inspection: ULTRA-TECH AEROSPACE INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ULTRA-TECH AEROSPACE INC in 3000 POWER DRIVE, KANSAS CITY, KS 66106 (NAICS 332710). OSHA activity number 347178352.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ULTRA-TECH AEROSPACE INC
- Site address
- 3000 POWER DRIVE
- City
- KANSAS CITY
- State
- KS
- ZIP
- 66106
- Mailing
- 3000 POWER DRIVE, KANSAS CITY, KS 66106
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 46
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jun 5, 2024
- Abate by
- Jul 2, 2024
- Penalty
- Initial $6,857 · Current $4,114 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section: At the workplace located at 3000 Power Drive, Kansas City, Kansas�66106, employees engaged in performing repair and preventive maintenance work on hard-wired equipment such as Lathes, Mazaks, Mori Seiki, and other equipment with more than one energy source were exposed to struck-by, caught in between, and electrical hazards due to no lockout / tagout equipment specific procedures being developed and implemented.
Recent events (2)
- — I (S) $4114.2
- — Z (S) $6857
1910.147 C07 I
- Issued
- Jun 5, 2024
- Abate by
- Jul 2, 2024
- Penalty
- Initial $6,857 · Current $4,114 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program was understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls were acquired by employees: At the workplace located at 3000 Power Drive, Kansas City, Kansas�66106, employees engaged in performing repair and preventive maintenance work on hard-wired equipment such as Lathes, Mazaks, Mori Seiki, and other equipment with more than one energy source were exposed to struck-by, caught in between, and electrical hazards due to no training being conducted on the company's lockout / tagout program, including specific lockout / tagout procedures for each machine with more than one energy source.
Recent events (2)
- — I (S) $4114.2
- — Z (S) $6857
1910.212 A01
- Issued
- Jun 5, 2024
- Abate by
- Jul 2, 2024
- Penalty
- Initial $5,485 · Current $3,291 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazards created by in-going nip points, rotating parts, and/or flying chips and sparks: At the workplace located at 3000 Power Drive, Kansas City, Kansas�66106, employees engaged in operating lathe #315 in bay 2 were exposed to struck-by hazards due to no chuck guard being provided.
Recent events (2)
- — I (S) $3291
- — Z (S) $5485
1910.215 A04
- Issued
- Jun 5, 2024
- Penalty
- Initial $4,113 · Current $2,468 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: At the workplace located at 3000 Power Drive, Kansas City, Kansas�66106, employees operating the Dayton bench grinder to debur materials in the Debur Area were exposed to struck-by hazards due to the work rests on the machine being approximately 5/8 inches from the abrasive wheel.
Recent events (2)
- — I (S) $2467.8
- — Z (S) $4113
1910.215 B09
- Issued
- Jun 5, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: At the workplace located at 3000 Power Drive, Kansas City, Kansas�66106, employees operating the Dayton bench grinder to debur materials in the Debur Area were exposed to struck-by hazards due to the tongue guards for the machine being approximately 1 inch from the abrasive wheel. The tongue guards could not be adjusted further toward to the abrasive wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Ultra-Tech Aerospace INC
View Ultra-Tech Aerospace INC's full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347178352.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.