SPOTSWOOD, NJ —
OSHA Inspection: COASTAL GRANITE & MARBLE
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of COASTAL GRANITE & MARBLE in 14 AMERICAN WAY, SPOTSWOOD, NJ 08884 (NAICS 327991). OSHA activity number 347180481.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COASTAL GRANITE & MARBLE
- Site address
- 14 AMERICAN WAY
- City
- SPOTSWOOD
- State
- NJ
- ZIP
- 08884
- Mailing
- 14 AMERICAN WAY, SPOTSWOOD, NJ 08884
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327991
- Employees
- 4
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.134 C01
- Issued
- Jun 21, 2024
- Abate by
- Jul 26, 2024
- Penalty
- Initial $3,457 · Current $3,457
S900
General-duty citation text
29 CFR 1910.134(c)(1):A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: (a) Coastal Granite and Marble, 14 American Way #7 Spotswood NJ 08884 On or about 12/21/2023 and thereafter, employee(s) were provided and required to use air-purifying respirators, such as 3M N95 masks, for which the employer did not have a written program for administering the use of respiratory protection in the workplace. The employer required employees to wear respirators while operating saws to cut marble and granite slabs, as well as polishing and/or grinding of cut countertop pieces using hand-held power tools.
Recent events (1)
- — Z (S) $3457
1910.134 E01
- Issued
- Jun 21, 2024
- Abate by
- Jul 26, 2024
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1910.134(e)(1):The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: (a) Coastal Granite and Marble, 14 American Way #7 Spotswood NJ 08884 On or about 12/21/2023, and thereafter, employee(s) were provided and required to use air-purifying respirators, such as 3M N95 masks, for which the employer did not provide a medical evaluation to employees to determine their ability to use a respirator before requiring use. The employer required employees to wear respirators while operating saws to cut marble and granite slabs, as well as polishing and/or grinding of cut countertop pieces using hand-held power tools.
Recent events (1)
- — Z (S) $0
1910.134 K03
- Issued
- Jun 21, 2024
- Abate by
- Jul 26, 2024
- Penalty
- Initial $0 · Current $0
S900
General-duty citation text
29 CFR 1910.134(k)(3):Training was not provided prior to requiring employees to use a respirator in the workplace: (a) Coastal Granite and Marble, 14 American Way #7 Spotswood NJ 08884 On or about 12/21/ 2023 and thereafter, employee(s) provided and required to use half-face air-purifying respirators were not provided training on respirator inspection, use (including seal-check), maintenance & storage. The employer required employees to wear respirators while operating saws to cut marble and granite slabs, as well as polishing and/or grinding of cut countertop pieces using hand-held power tools.
Recent events (1)
- — Z (S) $0
1910.1053 D01
- Issued
- Jun 21, 2024
- Penalty
- Initial $3,457 · Current $3,457
9000
General-duty citation text
29 CFR 1910.1053(d)(1):The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2) or the scheduled monitoring option in paragraph (d)(3) of this section: (a) Coastal Granite and Marble, 14 American way #7 Spotswood NJ 08884 On or about 12/21/2023 and thereafter, employee(s) performed duties that may reasonably be expected to expose them to respirable crystalline silica at or above the action level, which included operating saws to cut granite & marble slabs, polishing, drilling & finishing stone countertops using hand-held power tools, and ancillary tasks such as opening bags of quartz, and changing filters No assessment of exposure for these employee(s) was conducted by the employer as part of an Exposure Control Plan for silica.
Recent events (1)
- — Z (S) $3457
1910.1053 F02 I
- Issued
- Jun 21, 2024
- Abate by
- Jul 26, 2024
- Penalty
- Initial $0 · Current $0
S900
General-duty citation text
29 CFR 1910.1053(f)(2)(i):The employer did not establish and implement a written exposure control plan designed to eliminate or minimize employee exposure (a) Coastal Granite and Marble, 14 American Way #7 Spotswood NJ 08884 On or about 12/21/2023, and thereafter, employee(s) performed duties that may reasonably be expected to expose them to respirable crystalline silica at or above the action level, which included operating saws to cut granite & marble slabs, polishing, drilling & finishing stone countertops using hand-held power tools, and ancillary tasks such as opening bags of quartz, and changing filters. The employer did not have a written Silica Exposure Control Plan designed to eliminate or minimize employee exposure to silica.
Recent events (1)
- — Z (S) $0
1910.1053 J01
- Issued
- Jun 21, 2024
- Abate by
- Jul 26, 2024
- Penalty
- Initial $0 · Current $0
S900
General-duty citation text
29 CFR 1910.1053(j)(1):The employer did not include respirable crystalline silica in the program established to comply with the hazard communication standard (HCS) (29 CFR 1910.1200): (a) Coastal Granite and Marble, 14 American Way #7 Spotswood NJ 08884 On or about 12/21/2023, and thereafter, employee(s) performed duties that may reasonably be expected to expose them to respirable crystalline silica at or above the action level, which included operating saws to cut granite & marble slabs, polishing, drilling & finishing stone countertops using hand-held power tools, and ancillary tasks such as opening bags of quartz, and changing filters. The hazard of respirable crystalline silica was not included under the employer's chemical hazard communication plan.
Recent events (1)
- — Z (S) $0
1910.1053 J03 I
- Issued
- Jun 21, 2024
- Abate by
- Jul 26, 2024
- Penalty
- Initial $0 · Current $0
S900
General-duty citation text
29 CFR 1910.1053(j)(3)(i):Employee information and training. (i) The employer shall ensure that each employee covered by this section can demonstrate knowledge and understanding of at least the following: (A): The health hazards associated with exposure to respirable crystalline silica; (B): Specific tasks in the workplace that could result in exposure to respirable crystalline silica; (C): Specific measures the employer has implemented to protect employees from exposure to respirable crystalline silica including engineering controls, work practices, and respirators to be used; (D): The contents of this section;(E): The purpose and a description of the medical surveillance program required by paragraph (i) of this section. (a) Coastal Granite and Marble, 14 American Way #7 Spotswood NJ 08884 On or about 12/21/2023 and thereafter, employee(s) performed duties that may reasonably be expected to expose them to respirable crystalline silica at or above the action level, which included operating saws to cut granite & marble slabs, polishing, drilling & finishing stone countertops using hand-held power tools, and ancillary tasks such as opening bags of quartz, and changing filters. Employee(s) were not provided information & training including silica health hazards, tasks posing risk of exposure, control measures in use and provisions of the OSHA Standard.
Recent events (1)
- — Z (S) $0
More inspections in this industry (NAICS 327991)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347180481.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.