JACKSONVILLE, FL —
OSHA Inspection: B3 MILLWORK INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of B3 MILLWORK INC. in 505 MYRTLE AVENUE NORTH, JACKSONVILLE, FL 32204 (NAICS 337215). OSHA activity number 347195570.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- B3 MILLWORK INC.
- Site address
- 505 MYRTLE AVENUE NORTH
- City
- JACKSONVILLE
- State
- FL
- ZIP
- 32204
- Mailing
- 505 MYRTLE AVENUE NORTH, JACKSONVILLE, FL 32204
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337215
- Employees
- 9
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.213 C01
- Issued
- Mar 20, 2024
- Penalty
- Initial $5,807 · Current $3,484 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a. At 505 North Myrtle Avenue, in Jacksonville, FL: On or about January 3, 2024, the employer exposed employees to amputation hazards, in that a SawStop 10" Professional cabinet saw did not have a guard while cutting wood and laminate sheets.
Recent events (2)
- — I (S) $3484.2
- — Z (S) $5807
1910.213 C02
- Issued
- Mar 20, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: a. At 505 North Myrtle Avenue, in Jacksonville, FL: On or about January 3, 2024, the employer exposed employees to struck by hazards, in that a SawStop 10" Professional cabinet saw was not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator while cutting wood and laminate sheets.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Mar 20, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: a. At 505 North Myrtle Avenue, in Jacksonville, FL: On or about January 3, 2024, the employer exposed employees to struck by hazards, in that a SawStop 10" Professional cabinet saw did not have a non-kickback fingers or dogs, located as to oppose the thrust while cutting wood and laminate sheets.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.242 B
- Issued
- Mar 20, 2024
- Penalty
- Initial $2,115 · Current $1,269 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i. a. At Sawstop saw table station, located at 505 North Myrtle Avenue, in Jacksonville, FL: On or about January 3, 2024, the employer exposed employees to struck-by and health hazards, in that the compressed air used for cleaning purposes was not reduced to less than 30 p.s.i and there was no chip guarding on the compressed air nozzle. b. At the SCMI Si400e station, located at located at 505 North Myrtle Avenue, in Jacksonville, FL: On or about January 3, 2024, the employer exposed employees to struck-by and health hazards, in that the compressed air used for cleaning purposes was not reduced to less than 30 p.s.i and there was no chip guarding on the compressed air nozzle.
Recent events (2)
- — I (S) $1269
- — Z (S) $2115
1910.37 B02
- Issued
- Mar 20, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": a. At 505 North Myrtle Avenue, in Jacksonville, FL: On or about January 3, 2024, the employer exposed employees to burns and entrapment hazards, in that exit were not marked by a sign reading "EXIT".
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.178 L02 II
- Issued
- Mar 20, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(2)(ii): The employer did not ensure that each operator had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace. a. At B3 Millwork shop, located at 505 N. Myrtle Avenue, in Jacksonville, FL: On or about January 3, 2024, the employer exposed employees to struck-by and crushed-by hazards, in that the employer did not ensure that each Powered Industrial Truck (forklift) operator had been trained and evaluated as required by this paragraph (l), prior to the employees operates the truck.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 G01 IV A
- Issued
- Mar 20, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: a. At the compressor room, located at 505 N Myrtle Avenue, in Jacksonville, FL: On or about January 3, 2024, the employer exposed employees to fire hazards, in that a flexible electric cord was used as a substitute for the fixed wiring of the structure to provide power to the compressors release air check valve.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at B3 Millwork INC.
View B3 Millwork INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337215)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347195570.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.