VESPER, WI —
OSHA Inspection: TWIN LAKE CRANBERRY CO., LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of TWIN LAKE CRANBERRY CO., LLC in 5526 WISCONSIN 186, VESPER, WI 54489 (NAICS 111334). OSHA activity number 347204638.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TWIN LAKE CRANBERRY CO., LLC
- Site address
- 5526 WISCONSIN 186
- City
- VESPER
- State
- WI
- ZIP
- 54489
- Mailing
- 5526 WISCONSIN 186, VESPER, WI 54489
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 111334
- Employees
- 44
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C01
- Issued
- Feb 14, 2024
- Abate by
- Feb 29, 2024
- Penalty
- Initial $8,067 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative. a) On or about and at times prior to November 2, 2023, at the previously addressed inspection site, there was no established program consisting of energy control procedure(s), employee training and periodic inspections to ensure employees performing any servicing or maintenance such as making adjustments to chains of the Marq Case Erector were protected from unexpected energizing, startup or release of stored energy.
Recent events (2)
- — I (S) $0
- — Z (S) $8067
1910.147 C04 I
- Issued
- Feb 14, 2024
- Abate by
- Feb 29, 2024
- Penalty
- Initial $8,067 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section. a) On or about and at times prior to November 2, 2023, at the previously addressed inspection site, procedures were not developed, documented, and utilized for the control of hazardous energies when employees were adjusting chains on the Marq case erector.
Recent events (2)
- — I (S) $0
- — Z (S) $8067
1910.147 C05 I
- Issued
- Feb 14, 2024
- Abate by
- Feb 29, 2024
- Penalty
- Initial $8,067 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources. a) On or about and at times prior to November 2, 2023, at the previously addressed inspection site, lock out devices and/or hardware were not provided and used to isolate and secure the Marq case erector from electrical and pneumatic energy sources when employees were making adjustments to chains of the machine.
Recent events (2)
- — I (S) $0
- — Z (S) $8067
1910.147 C07 I
- Issued
- Feb 14, 2024
- Abate by
- Feb 29, 2024
- Penalty
- Initial $8,067 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees. a) On or about and at times prior to November 2, 2023, at the previously addressed inspection site, employees servicing and maintaining machines such as the Marq case erector were not provided adequate training to ensure the purpose and function of an energy control program was understood by employees.
Recent events (2)
- — I (S) $0
- — Z (S) $8067
1910.219 F03
- Issued
- Feb 14, 2024
- Abate by
- Feb 29, 2024
- Penalty
- Initial $8,067 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed. a) On or about and at times prior to November 2, 2023, at the previously addressed inspection site, chains and sprocket wheels of the Marq case erector machine less than seven feet above floors were not enclosed exposing employees to ingoing nip points, crushing hazards and amputation hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $8067
1904.39 A02
- Issued
- Feb 14, 2024
- Penalty
- Initial $8,067 · Current $0 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye. a) On or about November 2, 2023, the employer did not report a work-related incident resulting in an amputation within 24 hours.
Recent events (2)
- — I (O) $0
- — Z (O) $8067
More inspections in this industry (NAICS 111334)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347204638.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.