ELIOT, ME —
OSHA Inspection: FUNKY ROCK DESIGNS
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of FUNKY ROCK DESIGNS in 406 HAROLD DOW HIGHWAY UNIT 1, ELIOT, ME 03903 (NAICS 327991). OSHA activity number 347206088.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FUNKY ROCK DESIGNS
- Site address
- 406 HAROLD DOW HIGHWAY UNIT 1
- City
- ELIOT
- State
- ME
- ZIP
- 03903
- Mailing
- 406 HAROLD DOW HIGHWAY UNIT 1, ELIOT, ME 03903
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327991
- Employees
- 3
- Ownership type
- A
Citations
9 citations on file for this inspection.
1910.37 B02
- Issued
- Apr 11, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": Establishment - The doors to be used as exits were not marked with a sign reading "Exit."
Recent events (1)
- — Z (S) $0
1910.178 L01 I
- Issued
- Apr 11, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): Establishment - The employer did not have a Powered Industrial Truck (PIT) training program in place to train employees on the safe use of the employer's CAT 2C6000 PIT.
Recent events (1)
- — Z (S) $0
1910.212 A01
- Issued
- Apr 11, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by the point of operation, ingoing nip points, rotating parts, flying chips, and sparks. Workshop - The Delta Drill Press, Model 18-900L, was not guarded by means of a chuck guard to protect the employees from point-of-operation hazards.
Recent events (1)
- — Z (S) $0
1910.213 B01
- Issued
- Apr 11, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(b)(1): Woodworking machine(s) were not provided with mechanical or electrical power controls so located that the operator could cut off the power from the machine without leaving his position at the point of operation: Unit #4 on the ground floor level - The on/off power switch on the 10-inch Ryobi portable table saw was non-functional.
Recent events (1)
- — Z (S) $0
1910.213 B03
- Issued
- Apr 11, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(b)(3): Provisions were not made to prevent woodworking machine(s) from automatically restarting upon restoration of power after power failure: Unit #4 on the ground floor level - The 10-inch Ryobi portable table saw did not have an anti-restart installed to prevent it from restarting upon restoration of power.
Recent events (1)
- — Z (S) $0
1910.213 C01
- Issued
- Apr 11, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood that completely enclosed that portion of the saw above the table and above the material being cut: Unit #4 on the ground floor level - The 10-inch Ryobi portable table saw did not have a guard installed over the blade.
Recent events (1)
- — Z (S) $0
1910.213 C02
- Issued
- Apr 11, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Handfed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: Unit #4 on the ground floor level - The 10-inch Ryobi portable table saw did not have a spreader attached to prevent material from squeezing the saw blade.
Recent events (1)
- — Z (S) $0
1910.213 H01
- Issued
- Apr 11, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(h)(1): Radial saw(s) did not have an upper hood that completely enclosed the upper portion of the blade down to a point including the end of the saw arbor: Top floor of bay 1 - The chop saw on the table used to cut tubes does not have a guard.
Recent events (1)
- — Z (S) $0
1910.305 B01 II
- Issued
- Apr 11, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: Break Room - The unit 240-volt electrical panel had two unused openings numbered 38 and 40 that were not closed off to prevent possible contact with live electrical wiring.
Recent events (1)
- — Z (S) $0
More inspections at Funky Rock Designs
View Funky Rock Designs's full OSHA safety record →
More inspections in this industry (NAICS 327991)
More inspections in ME
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347206088.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.