NEW BRITAIN, CT —
OSHA Inspection: INTEGRA-CAST INCORPORATED
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of INTEGRA-CAST INCORPORATED in 265 NEWINGTON AVENUE, NEW BRITAIN, CT 06051 (NAICS 331524). OSHA activity number 347213266.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Integra-Cast Incorporated — free
Get an email when a new federal OSHA severe-injury report for Integra-Cast Incorporated is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- INTEGRA-CAST INCORPORATED
- Site address
- 265 NEWINGTON AVENUE
- City
- NEW BRITAIN
- State
- CT
- ZIP
- 06051
- Mailing
- 265 NEWINGTON AVENUE, NEW BRITAIN, CT 06051
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331524
- Employees
- 30
- Ownership type
- A
Citations
9 citations on file for this inspection.
1910.22 A02
- Issued
- Jul 15, 2024
- Abate by
- Aug 19, 2024
- Penalty
- Initial $6,453 · Current $0 Reduced
General-duty citation text
29 CFR 1910.22(a)(2): The employer did not ensure that the floor of each workroom is maintained in a clean and, to the extent feasible, in a dry condition. The employer did not ensure that when wet processes are used, drainage is be maintained and, to the extent feasible, dry standing places, such as false floors, platforms, and mats are provided. On or about January 17, 2024, employees were exposed to slip and fall hazards as a result of wet floors and standing water: 1) Knock-Off Area: Three blasting cabinets used by employees to manually clean off parts with pressurized water nozzles were missing seals, gaskets, and liners resulting in standing water on the floor. 2) Outside Shell Room (Investment Ovens): A large area of standing water was present in the Shell Investment Area resulting from extensive heat and steam used to melt wax blanks.
Recent events (2)
- — I (S) $0
- — Z (S) $6453
1910.22 A03
- Issued
- Jul 15, 2024
- Abate by
- Aug 19, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(a)(3): The employer did not ensure that walking-working surfaces are maintained free of hazards such as sharp or protruding objects, loose boards, corrosion, leaks, spills, snow, and ice. 265 Newington Avenue (Foundry Area): On or about January 17, 2024, silica and aluminum oxide powder utilized by the employer to create ceramic shells for casting aluminum parts left a residual film present throughout the facility creating a slip-fall hazard for employees. 1) Foundry Area (Knock-Off Area): Knock-Off Area was coated in dust and crumbled ceramic shells from the air-chisel booth where employees remove the shells from the newly-formed aluminum parts. 2) Shell Room: Silica slurry from the dipping action of the Investment Mold-Making process covered the majority of the Shell Room floor creating a slip-fall hazard to employees entering the room.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.110 E04 III
- Issued
- Jul 15, 2024
- Abate by
- Aug 19, 2024
- Penalty
- Initial $8,067 · Current $4,049 Reduced
General-duty citation text
29 CFR 1910.110(e)(4)(iii): Permanent and removable fuel containers were not securely mounted to prevent jarring loose, slipping, or rotating: Foundry Area: On or about January 17, 2024, employees had been operating a forklift with the 33-gallon Liquid Petroleum Gas (LPG/LP) tank unsecured at the rear of the vehicle.
Recent events (2)
- — I (S) $4049
- — Z (S) $8067
1910.147 C04 I
- Issued
- Jul 15, 2024
- Abate by
- Aug 19, 2024
- Penalty
- Initial $8,067 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): General Environmental Controls - Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section. Shell Investing Room / Second Section Interlocked Barrier Guard: On or about January 17, 2024, the Employer did not develop, document, and/or utilize procedures for the control of potentially hazardous energy for Employees when conducting routine service, repair, and/or adjustments on the Mixing Slurry Drum operating in concert with the IRB 6710 Articulated Robot (ABB Robotics).
Recent events (2)
- — I (S) $0
- — Z (S) $8067
1910.212 A01
- Issued
- Jul 15, 2024
- Abate by
- Aug 19, 2024
- Penalty
- Initial $8,067 · Current $4,049 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Foundry Area: Band Saw: On or about January 17, 2024, the employer did not ensure that the DoAll Saw Band Saw was properly guarded to prevent employee injuries.
Recent events (2)
- — I (S) $4049
- — Z (S) $8067
1910.215 A04
- Issued
- Jul 15, 2024
- Abate by
- Aug 29, 2024
- Penalty
- Initial $4,839 · Current $2,435 Reduced
General-duty citation text
29 CFR 1910.215(a)(4):Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: MACHINE SHOP: On or about January 17, 2024, the employer did not ensure that work rests were installed and properly adjusted on the Task Force Model 6-Inch Grinder thereby exposing employees using the grinder to injury.
Recent events (2)
- — I (S) $2435
- — Z (S) $4839
1910.215 B09
- Issued
- Jul 15, 2024
- Abate by
- Aug 29, 2024
- Penalty
- Initial $4,839 · Current $0 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: MACHINE SHOP: On or about January 17, 2024, the employer did not ensure that a tongue guards were installed on the bench grinder exposing employees to potential injury.
Recent events (2)
- — I (S) $0
- — Z (S) $4839
1910.36 B01
- Issued
- Jul 15, 2024
- Abate by
- Dec 31, 2024
- Penalty
- Initial $12,905 · Current $6,467 Reduced
General-duty citation text
29 CFR 1910.36(b)(1): At least two exit routes were not available to permit prompt evacuation of employees during an emergency. Foundry Area: On or about January 17, 2024, at least two exit routes were not available to permit prompt evacuation of employees during an emergency. Due to the size of the room and the type of operation, two or more exits were required for egress. Integra-Cast Incorporated was previously cited for a violation of this occupational safety and health standard, which was contained in OSHA inspection number 1492656, citation number 1, item number 1a, and was affirmed as a final order on March 9, 2021, with respect to a workplace located at 265 Newington Avenue, New Britain, CT 06051.
Recent events (2)
- — I (R) $6467
- — Z (R) $12905
1910.36 E01
- Issued
- Jul 15, 2024
- Abate by
- Aug 19, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.36(e)(1): A side-hinged door was not used to connect any room to an exit route: 265 Newington Avenue (Shell Room): On or about, January 17, 2024, "Shell Room" of the Employers production facility was not connected by way of a side hinged door to an exit route. One end of the room was accessed through a sliding door and the other end was accessed through a sliding door. Integra-Cast Incorporated was previously cited for a violation of this occupational safety and health standard which was contained in OSHA inspection number 1492656, citation number 1, item number 1b, and was affirmed as a final order on March 09, 2021, with respect to a workplace located at 265 Newington Avenue, New Britain, CT 06051.
Recent events (2)
- — I (R) $0
- — Z (R) $0
More inspections at Integra-Cast Incorporated
View Integra-Cast Incorporated's full OSHA safety record →
More inspections in this industry (NAICS 331524)
Jul 16, 2026
Olson Aluminum Castings, LTD. · ROCKFORD, IL
Jul 16, 2026
Olson Aluminum Castings, LTD. · ROCKFORD, IL
Jul 13, 2026
Linamar Structures Fruitport · FRUITPORT, MI
Jun 4, 2026
Sani KAN Underground Garbage · FORT LAUDERDALE, FL
Jun 3, 2026
Alcast Aquisition Company LLC · GALESBURG, IL
More inspections in CT
Jul 16, 2026
Bianco & Sons, LLC · EAST HAVEN, CT
Jul 16, 2026
Moms Enfield · ENFIELD, CT
Jul 16, 2026
Harbor Freight · DAYVILLE, CT
Jul 14, 2026
Jananii, LLC · NEW BRITAIN, CT
Jul 14, 2026
Truss Manufacturing INC · NEWINGTON, CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347213266.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.