DESTIN, FL —
OSHA Inspection: DESTIN MACHINE, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of DESTIN MACHINE, INC. in 600 FOURTH ST., DESTIN, FL 32541 (NAICS 332721). OSHA activity number 347214447.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DESTIN MACHINE, INC.
- Site address
- 600 FOURTH ST.
- City
- DESTIN
- State
- FL
- ZIP
- 32541
- Mailing
- 600 FOURTH ST., DESTIN, FL 32541
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332721
- Employees
- 6
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.212 A01
- Issued
- Mar 25, 2024
- Abate by
- Apr 15, 2024
- Penalty
- Initial $2,351 · Current $1,411 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Guifil press brake machine : On or about January 17, 2024, and at times prior to, the employer exposed employees to pinch point hazards by not ensuring the point of operation was properly guarded for the Guifil press brake machine.
Recent events (2)
- — I (S) $1410.6
- — Z (S) $2351
1910.132 D02
- Issued
- Mar 25, 2024
- Abate by
- Apr 15, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2):The employer did not identify a document as a certification of hazard assessment: a) Shop areas: On or about January 17, 2024, and at times prior to, the employer failed to verify that the required workplace hazard assessment had been performed through a written certification that identified the workplace evaluated, the person certifying that the evaluation had been performed, the date(s) of the hazard assessment, and which identified the documents as a certification of hazard assessment for tasks such as, but not limited to, welding, CNC, Lathes, tooling machines, press brake and water jet operations.
Recent events (1)
- — Z (O) $0
1910.134 C02 I
- Issued
- Mar 25, 2024
- Abate by
- Apr 15, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(2)(i):The employer did not determine if the voluntary use of a respirator did not in itself create a hazard: a) Shop and Outside Yard Area: On or about January 17, 2024, and at times prior to, the employer provided to the employees filtering face piece respirators and did not ensure the voluntary use of such respirator did not in itself create a hazard.
Recent events (1)
- — Z (O) $0
1910.134 K06
- Issued
- Mar 25, 2024
- Abate by
- Apr 15, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(6):The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer: a) Shop and Outside Yard Area: On or about January 17, 2024, and at times prior to, the employer provided to the employees particulate filtering face piece respirators and did not ensure the employees were provided training on the respirator.
Recent events (1)
- — Z (O) $0
1910.178 L02 II
- Issued
- Mar 25, 2024
- Abate by
- Apr 15, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(2)(ii):The employer did not ensure that each operator had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace. a) Shop area: On or about January 17, 2024, and at times prior to, the employer did not ensure drivers completed the training required in 1910.178(l) before permitting them to use a powered industrial truck.
Recent events (1)
- — Z (O) $0
1910.1200 H01
- Issued
- Mar 25, 2024
- Abate by
- Apr 15, 2024
- Penalty
- Initial $0 · Current $0
2150
General-duty citation text
29 CFR 1910.1200(h)(1):Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a)Facility wide: On or about January 17, 2024, and at times prior to, the employer did not provide hazard communication training to its employees.
Recent events (1)
- — Z (O) $0
More inspections at Destin Machine, INC.
View Destin Machine, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332721)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347214447.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.