OSSEO, WI —
OSHA Inspection: CONTINENTAL PRODUCTS CORPORATION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CONTINENTAL PRODUCTS CORPORATION in 50863 ELEVATOR ST P.O. BOX 126, OSSEO, WI 54758 (NAICS 333120). OSHA activity number 347215766.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CONTINENTAL PRODUCTS CORPORATION
- Site address
- 50863 ELEVATOR ST P.O. BOX 126
- City
- OSSEO
- State
- WI
- ZIP
- 54758
- Mailing
- 50863 ELEVATOR ST P.O. BOX 126, OSSEO, WI 54758
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333120
- Employees
- 18
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jan 23, 2024
- Abate by
- Feb 13, 2024
- Penalty
- Initial $3,918 · Current $2,743 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) Old shop; A documented energy control procedure was not developed for servicing activities such as, but not limited to, die changes on the Accurpress Advantage model 725012 (Serial No. 8672) press brake.
Recent events (2)
- — I (S) $2742.6
- — Z (S) $3918
1910.147 D03
- Issued
- Jan 23, 2024
- Abate by
- Feb 13, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s): (a) Old shop; Energy isolating device(s) were not located and operated in such a manner as to isolate energy source(s) prior to performing servicing activities such as, but not limited to, die changes on the Accurpress Advantage model 725012 (Serial No. 8672) press brake.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 D04 I
- Issued
- Jan 23, 2024
- Abate by
- Feb 13, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: (a) Old shop; Lockout or tagout devices were not affixed to the energy isolation device(s) by authorized employee(s) prior to performing servicing activities such as, but not limited to, die changes on the Accurpress Advantage model 725012 (Serial No. 8672) press brake.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Jan 23, 2024
- Abate by
- Mar 13, 2024
- Penalty
- Initial $3,918 · Current $2,743 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) New shop; The employer did not provide effective methods of machine guarding to protect employee(s) from the ingoing nip points of the plate roller machine. (b) Old shop; The older Arboga drill press was not equipped with adequate guarding to protect employee(s) against flying chips and rotating parts of the chuck and drill bit.
Recent events (2)
- — I (S) $2742.6
- — Z (S) $3918
1910.212 B
- Issued
- Jan 23, 2024
- Abate by
- Feb 6, 2024
- Penalty
- Initial $2,350 · Current $1,645 Reduced
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: (a) Old shop; The newer Arboga drill press was not securely anchored to prevent walking or moving during operation.
Recent events (2)
- — I (S) $1645
- — Z (S) $2350
More inspections at Continental Products Corporation
View Continental Products Corporation's full OSHA safety record →
More inspections in this industry (NAICS 333120)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347215766.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.