Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CELTIC MANUFACTURING, LLC

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of CELTIC MANUFACTURING, LLC in 9755 DELEGATES DR UNIT C, ORLANDO, FL 32837 (NAICS 332710). OSHA activity number 347218174.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Celtic Manufacturing, LLC — free Get an email when a new federal OSHA severe-injury report for Celtic Manufacturing, LLC is published. One employer, no account, unsubscribe in one click.
Site address
9755 DELEGATES DR UNIT C
City
ORLANDO
State
FL
ZIP
32837
Mailing
4757 THE GROVE DR SUITE 220, WINDERMERE, FL 34786
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332710
Employees
26
Ownership type
A

5 citations on file for this inspection.

1910.134 C01

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 8, 2024
Abate by
Aug 1, 2024
Penalty
Initial $6,453 · Current $3,872 Reduced
29 CFR  1910.134(c)(1):The employer did not establish and implement a written respiratory protection program with worksite-specific procedures in any workplace where respirators were necessary to protect the health of the employee or whenever respirators were required by the employer:  a. On or about January 18, 2024, in the paint and sandblasting area: an employee was exposed to respiratory hazards during painting and sandblasting operations, in that, the employer did not establish and implement a written respiratory protection program with worksite-specific procedures for the employee wearing a 3M 6200 Half Face respirator during painting operations and a North 5400 Full Face respirator during sandblasting operations.
Recent events (2)
  • — I (S) $3871.8
  • — Z (S) $6453

1910.134 E01

Serious Gravity 5 2 instances 1 exposed
Issued
Jul 8, 2024
Abate by
Aug 22, 2024
Penalty
Initial $0 · Current $0
29 CFR  1910.134(e)(1):The employer did not provide a medical evaluation to determine the employee's ability to use a respirator before the employee was fit tested or required to use the respirator in the workplace:  a. On or about January 18, 2024, in the paint area: an employee was exposed to respiratory hazards during painting operations, in that the employee was required to wear a 3M 6200 Half Face respirator and was not provided with a medical evaluations to determine the employee's ability to wear the respirator.   b. On or about January 18, 2024, in the sandblasting area: an employee was exposed to respiratory hazards during sandblasting operations, in that the employee was required to wear a North 5400 Full Face respirator and was not provided with a medical evaluations to determine the employee's ability to wear a respirator.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 F02

Serious Gravity 5 2 instances 1 exposed
Issued
Jul 8, 2024
Abate by
Aug 1, 2024
Penalty
Initial $0 · Current $0
29 CFR  1910.134(f)(2):The employer did not ensure that an employee using a tight-fitting respirator was fit tested prior to initial use of the respirator, whenever a different respirator facepiece was used, and at least annually thereafter:  a. On or about January 18, 2024, in the paint area: an employee was exposed to respiratory hazards during painting operations, in that the employee was required to wear a 3M 6200 Half Face respirator and was not provided with a fit test prior to initial use of the respirator.   b. On or about January 18, 2024, in the sandblasting area: an employee was exposed to respiratory hazards during sandblasting operations, in that the employee was required to wear a North 5400 Full Face respirator and was not provided with a fit test prior to initial use of the respirator.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1053 D01

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 8, 2024
Abate by
Aug 22, 2024
Penalty
Initial $8,067 · Current $4,840 Reduced
29 CFR  1910.1053(d)(1):The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2) or the scheduled monitoring option in paragraph (d)(3) of this section:  a. On or about January 18, 2024, in the sandblasting area: an employee was exposed to respiratory hazards during sandblasting operations, in that the employee was required to wear a North 5400 Full Face respirator and the employer did not assess the exposure of each employee who was or may reasonably be exposed to respirable silica at or above the action level. Employees were observed performing daily tasks such as, but not limited to, sandblasting area as remove dirt, paint, grease, and other built-up material from surfaces.
Recent events (2)
  • — I (S) $4840.2
  • — Z (S) $8067

1910.1053 F02 III

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 8, 2024
Abate by
Aug 22, 2024
Penalty
Initial $0 · Current $0
29 CFR  1910.1053(f)(2)(iii):The employer did not make the written exposure control plan readily available for examination and copying, upon request, to each employee covered by this section, their designated representatives, the Assistant Secretary and the Director:  a. On or about January 18, 2024, in the sandblasting area: an employee was exposed to respiratory hazards during sandblasting operations, in that the employer did not make the written exposure control plan readily available for examination and copying, upon request, to each employee covered by this section. Employees were observed performing daily tasks such as, but not limited to, sandblasting area as remove dirt, paint, grease, and other built-up material from surfaces .
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Celtic Manufacturing, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347218174.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.