DENVER, CO —
OSHA Inspection: INLAND TRUCK PARTS & SERVICE
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of INLAND TRUCK PARTS & SERVICE in 5555 N. JOLIET ST, STE 150, DENVER, CO 80239 (NAICS 811111). OSHA activity number 347225831.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- INLAND TRUCK PARTS & SERVICE
- Site address
- 5555 N. JOLIET ST, STE 150
- City
- DENVER
- State
- CO
- ZIP
- 80239
- Mailing
- 7015 COLLEGE BLVD, STE 650, OVERLAND PARK, KS 66211
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811111
- Employees
- 23
- Ownership type
- A
Citations
6 citations on file for this inspection.
5(a)(1)
- Issued
- Mar 20, 2024
- Abate by
- May 6, 2024
- Penalty
- Initial $9,795 · Current $0 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1):The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees were exposed to struck by hazards: a) 5555 JOLIET ST DENVER, CO 80239 - Warehouse: On or around January 19, 2024 and at time prior, employees were exposed to struck by falling object and crushing hazards in that storage racks loaded with vehicle parts , including but not limited to transmission casings, were not labeled with loading capacities.
Recent events (2)
- — I (S) $0
- — Z (S) $9795
1910.178 L04 III
- Issued
- Mar 20, 2024
- Abate by
- May 6, 2024
- Penalty
- Initial $5,876 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years (a) 5555 JOLIET ST DENVER, CO 80239 -component shop : On or around January 19 2024, and at times prior, employees were exposed to struck by hazards associated with forklift operations in that powered industrial truck operator's performance was not being conducted at least once every three years.
Recent events (2)
- — I (O) $1500
- — Z (S) $5876
1910.212 A01
- Issued
- Mar 20, 2024
- Abate by
- May 6, 2024
- Penalty
- Initial $5,876 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) 5555 JOLIET ST DENVER, CO 80239 -component shop : On or around January 19 2024, and at times prior, employees were exposed to struck by hazards from flying chips and sparks while utilizing an unguarded Craftsman Drill Press (Model 103.24521 / 103.24531) b) 5555 JOLIET ST DENVER, CO 80239 -component shop : On or around January 19 2024, and at times prior, employees were exposed to struck by hazards from flying objects while using the unguarded OTC 25-ton press (Model 1833) in the component shop.
Recent events (2)
- — I (S) $0
- — Z (S) $5876
1910.215 B09
- Issued
- Mar 20, 2024
- Abate by
- May 6, 2024
- Penalty
- Initial $5,876 · Current $0 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) 5555 JOLIET ST DENVER, CO 80239 - Component shop: On or around January 19, 2024, and at times prior, employees were exposed to struck by flying object and abrasion hazards from flying objects while utilizing a 10" Delta grinding wheel model # 23-196 / 23-197 with the maximum distance of 1/4" between the griding wheel and the top guard exceeded.
Recent events (2)
- — I (S) $0
- — Z (S) $5876
1910.215 A04
- Issued
- Mar 20, 2024
- Abate by
- May 6, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a) 5555 JOLIET ST DENVER, CO 80239 - Component shop: On or around January 19, 2024, and at times prior, employees were exposed to struck by flying object and abrasion hazards from flying while utilizing a 10" Delta grinding wheel model # 23-196 / 23-197 with the maximum distance of 1/8" between the work rest and the griding wheel exceeded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 G01 IV A
- Issued
- Mar 20, 2024
- Abate by
- May 6, 2024
- Penalty
- Initial $5,876 · Current $0 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: (a) 5555 JOLIET ST DENVER, CO 80239- Warehouse: On or around January 19, 2024, and at times prior, employees were exposed to fire and electrical hazards in that flexible cords in the warehouse were used in place of permanent wiring to power a JET HVBS-712 Metal Bandsaw.
Recent events (2)
- — I (S) $0
- — Z (S) $5876
More inspections at Inland Truck Parts & Service
View Inland Truck Parts & Service's full OSHA safety record →
More inspections in this industry (NAICS 811111)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347225831.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.