SAN ANTONIO, TX —
OSHA Inspection: UNIVERSAL MARBLE IMPORT CORPORATION
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of UNIVERSAL MARBLE IMPORT CORPORATION in 9810 MCCULLOUGH AVENUE, SAN ANTONIO, TX 78216 (NAICS 327991). OSHA activity number 347227035.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- UNIVERSAL MARBLE IMPORT CORPORATION
- Site address
- 9810 MCCULLOUGH AVENUE
- City
- SAN ANTONIO
- State
- TX
- ZIP
- 78216
- Mailing
- 9810 MCCULLOUGH AVENUE, SAN ANTONIO, TX 78216
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327991
- Employees
- 4
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.157 E03
- Issued
- Apr 30, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check: Shop areas: On or about January 23, 2024, and at times prior thereto, employees were exposed to fire hazards when using flammable liquids and the employer did not conduct annual maintenance inspections of the portable fire extinguishers.
Recent events (1)
- — Z (S) $0
1910.305 B02 I
- Issued
- Apr 30, 2024
- Abate by
- Jun 3, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(2)(i):Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy: Shop area: On or about January 23, 2024, and at times prior thereto, employees were exposed to fire hazards when having an electrical outlet not covered with a faceplate.
Recent events (1)
- — Z (S) $0
1910.305 G01 IV B
- Issued
- Apr 30, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(B):Unless specifically permitted otherwise in paragraph (g)(1)(ii) of this section, flexible cords and cables may not be used: Where run through holes in walls, ceilings, or floors. Shop area: On or about January 23, 2024, and at times prior thereto, employees were exposed to fire hazards when using portable machinery that was plugged in on flexible electrical cords that were run through ceilings throughout the facility.
Recent events (1)
- — Z (S) $0
1910.334 A02 I
- Issued
- Apr 30, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.334(a)(2)(i):Portable cord and plug-connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects. Shop area: On or about January 23, 2024, and at times prior thereto, employees were exposed to fire hazards when using flexible electrical cords that were damaged, bent, or frayed and taped up with electrical tape.
Recent events (1)
- — Z (S) $0
1910.1053 F02 I
- Issued
- Apr 30, 2024
- Abate by
- Jun 3, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1053(f)(2)(i):The employer did not establish and implement a written exposure control plan: Shop Area: On or about January 23, 2024, and at times prior thereto, employees are exposed to respirable silica when cutting or grinding granite or marble, and the employer had not established a written exposure control plan.
Recent events (1)
- — Z (S) $0
1910.1200 E01
- Issued
- Apr 30, 2024
- Abate by
- Jun 3, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1):The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: Shop area: On or about January 23, 2024, and at times prior thereto, employees were exposed to chemical hazards such as but not limited to flammable liquids, and respirable silica quartz while not provided with a hazard communication program which includes information and training, safety data sheets, and proper labeling of secondary containers.
Recent events (1)
- — Z (S) $0
1910.134 K06
- Issued
- Apr 30, 2024
- Abate by
- Jun 3, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(6):The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer. Shop area: On or about January 23, 2024, and at times prior thereto, employees were exposed to respiratory hazards by failing to provide employees who voluntarily wear N95 dust masks with basic advisory information on respirators as presented in Appendix D of 29 CFR 1910.134.
Recent events (1)
- — Z (O) $0
More inspections at Universal Marble Import Corporation
View Universal Marble Import Corporation's full OSHA safety record →
More inspections in this industry (NAICS 327991)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347227035.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.