PAGO PAGO, AS —
OSHA Inspection: CORPORATION - LD CONSTRUCTION INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CORPORATION - LD CONSTRUCTION INC. in UTULEI, PAGO PAGO, AS 96799 (NAICS 236220). OSHA activity number 347236572.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CORPORATION - LD CONSTRUCTION INC.
- Site address
- UTULEI
- City
- PAGO PAGO
- State
- AS
- ZIP
- 96799
- Mailing
- P.O. BOX 7133, PAGO PAGO, AS 96799
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- Employees
- 21
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.451 B01
- Issued
- Mar 8, 2024
- Abate by
- Mar 20, 2024
- Penalty
- Initial $6,452 · Current $3,871 Reduced
General-duty citation text
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii): East side of the jobsite facing the Immigration Building: Employees were working from a 10-foot 3-inch job-built scaffold that was not fully planked. Employees were exposed to fall hazards.
Recent events (2)
- — I (S) $3871.2
- — Z (S) $6452
1926.451 E01
- Issued
- Mar 8, 2024
- Penalty
- Initial $4,702 · Current $2,821 Reduced
General-duty citation text
29 CFR 1926.451(e)(1):When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used. Crossbraces were used as a means of access. East side of the jobsite facing the Immigration Building: There were no means of access for the employees working on the 10-foot 3-inch job-built scaffold. Employees were exposed to fall hazards.
Recent events (2)
- — I (S) $2821.2
- — Z (S) $4702
1926.501 B01
- Issued
- Mar 8, 2024
- Penalty
- Initial $6,452 · Current $3,871 Reduced
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface having an unprotected side or edge which was six or more feet (1.8m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal arrest system: East side of the jobsite facing the Immigration Building: Employees were working from a 10-foot 3-inch job-built scaffold that did not have guardrails along the perimeter of the scaffold facing the concrete foundation. Employees were exposed to fall hazards.
Recent events (2)
- — I (S) $3871.2
- — Z (S) $6452
1926.701 B
- Issued
- Mar 8, 2024
- Abate by
- Mar 20, 2024
- Penalty
- Initial $3,134 · Current $1,880 Reduced
General-duty citation text
29 CFR 1926.701(b): All protruding reinforcing steel, onto and/or into which employees could fall, was not guarded to eliminate the hazard of impalement: a. Main jobsite area: Rebar that protruded from the foundation was not guarded. Employees were exposed to impalement hazards. b. East side of the jobsite: Rebar that protruded through the foundation for the pillars were not guarded. Employees were exposed to impalement hazards.
Recent events (2)
- — I (S) $1880.4
- — Z (S) $3134
1926.405 G02 IV
- Issued
- Mar 8, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.405(g)(2)(iv):Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: Main jobsite area: An employee using the Worm Drive SkilSaw SPT 77 WML to cut lumber was powered by an extension cord that had exposed strain relief on the female end. The employee was exposed to electrical hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 236220)
More inspections in AS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347236572.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.