WRIGHTSTOWN, WI —
OSHA Inspection: VANDEN WYMELENBERG ENTERPRISES, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of VANDEN WYMELENBERG ENTERPRISES, INC. in 400 HIGH ST., WRIGHTSTOWN, WI 54180 (NAICS 445110). OSHA activity number 347248551.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VANDEN WYMELENBERG ENTERPRISES, INC.
- Site address
- 400 HIGH ST.
- City
- WRIGHTSTOWN
- State
- WI
- ZIP
- 54180
- Mailing
- PO BOX 95, WRIGHTSTOWN, WI 54180
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 445110
- Employees
- 45
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C01
- Issued
- Mar 27, 2024
- Abate by
- Aug 15, 2024
- Penalty
- Initial $6,453 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:(a)(LOCATION)(IDENTIFY SPECIFIC OPERATIONS AND/OR CONDITIONS)(IDENTIFY MACHINERY OR EQUIPMENT) On or about February 01, 2024, at location 400 High Street, Wrightstown, WI 54180: the employer did not establish and energy control program for the employees performing the servicing or maintenance on the Oliver Machinery Company Gravity Fed Bread Slicer (Mach no:797C Serial: 47748).
Recent events (2)
- — I (S) $3500
- — Z (S) $6453
1910.263 J01 III
- Issued
- Mar 27, 2024
- Abate by
- Aug 15, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.263(j)(1)(iii): The cover over the knife head of reciprocating-blade slicers shall be provided with an interlocking arrangement so that the machine cannot operate unless the cover is in place. On or about February 01, 2024, at location 400 High Street, Wrightstown, WI 54180: The employer did not have a cover over the knife head of reciprocating-blade slicers with an interlocking arrangement so that the machine cannot operate unless the cover is in place for the Oliver Machinery Company Gravity Fed Bread Slicer (Mach no:797C Serial: 47748).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.304 G05
- Issued
- Mar 27, 2024
- Penalty
- Initial $4,839 · Current $2,250 Reduced
General-duty citation text
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective: On or about February 01, 2024, at location 400 High Street, Wrightstown, WI 54180: the plug for the Oliver Machinery Company Gravity Fed Bread Slicer (Mach no:797C Serial: 47748) was damaged and missing the equipment ground pin, exposing employees to shock hazards.
Recent events (2)
- — I (S) $2250
- — Z (S) $4839
1910.1200 H01
- Issued
- Mar 27, 2024
- Abate by
- Aug 15, 2024
- Penalty
- Initial $4,839 · Current $2,250 Reduced
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: On or about February 01, 2024, at location 400 High Street, Wrightstown, WI 54180: the employer did not provide employee training on the hazardous chemicals used in the work area, when employees worked with hazardous chemicals such as, but not limited to, degreasers, and sanitizers.
Recent events (2)
- — I (S) $2250
- — Z (S) $4839
1910.38 B
- Issued
- Mar 27, 2024
- Abate by
- Aug 15, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.38(b): Written and oral emergency action plans. An emergency action plan must be in writing, kept in the workplace, and available to employees for review. However, an employer with 10 or fewer employees may communicate the plan orally to employees. On or about February 01, 2024, at location 400 High Street, Wrightstown, WI 54180: the employer did not have a written emergency action plan in writing or for employee review, exposing employees to potential thermal injuries.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 445110)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347248551.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.