HOUSTON, TX —
OSHA Inspection: EAGLE FABRICATORS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of EAGLE FABRICATORS, INC. in 11558 HARTLEY RD, HOUSTON, TX 77093 (NAICS 332312). OSHA activity number 347249708.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EAGLE FABRICATORS, INC.
- Site address
- 11558 HARTLEY RD
- City
- HOUSTON
- State
- TX
- ZIP
- 77093
- Mailing
- 5522 SHIRLEY LN, HOUSTON, TX 77032
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 100
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.22 A01
- Issued
- Apr 15, 2024
- Penalty
- Initial $8,067 · Current $4,437 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): The employer did not ensure that all places of employment, passageways, storerooms, service rooms, and walking-working surfaces are kept in a clean, orderly, and sanitary condition. On or about February 1, 2024, at the saw machine of fabrication shop employees were exposed to slip, trip hazards as employer did not ensure the area in front of the saw machine e-stop was kept in a clean and orderly condition.
Recent events (2)
- — I (S) $4436.85
- — Z (S) $8067
1910.178 P01
- Issued
- Apr 15, 2024
- Abate by
- Apr 29, 2024
- Penalty
- Initial $8,067 · Current $4,437 Reduced
General-duty citation text
29 CFR 1910.178(p)(1):Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s) On or about February 1, 2024, at the fabrication shop and outside area employees were exposed to a struck-by hazard while operating a JLG telehandler that had a non-working horn.
Recent events (2)
- — I (S) $4436.85
- — Z (S) $8067
1910.305 G02 III
- Issued
- Apr 15, 2024
- Abate by
- Apr 29, 2024
- Penalty
- Initial $8,067 · Current $4,437 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii):Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: On or about February 1, 2024, at the saw machine of fabrication shop employees were exposed to an electrical hazard as there was a power cord of an e-stop that did not have proper strain relief.
Recent events (2)
- — I (S) $4436.85
- — Z (S) $8067
1910.1200 G01
- Issued
- Apr 15, 2024
- Abate by
- Apr 29, 2024
- Penalty
- Initial $6,453 · Current $3,549 Reduced
General-duty citation text
29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical which they use. On or about February 1, 2024, at the fabrication shop and outside yard the employer did not have safety data sheets for chemicals such as compressed oxygen, carbon dioxide and gasoline.
Recent events (2)
- — I (S) $3549.15
- — Z (S) $6453
1910.1200 H01
- Issued
- Apr 15, 2024
- Abate by
- Apr 29, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1):Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: On or about February 1, 2024, at the fabrication shop and outside yard employees were not trained while using chemicals such as compressed oxygen, carbon dioxide and gasoline.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 A06
- Issued
- Apr 15, 2024
- Abate by
- Apr 29, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(6):The employer did not ensure that all nameplates or markings were maintained in place and in legible condition: On or about February 1, 2024, at the fabrication shop and outside area there was a JLG telehandler which had a missing data plate.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Eagle Fabricators, INC.
View Eagle Fabricators, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347249708.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.