Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CRYSTAL LAKE FOODS, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of CRYSTAL LAKE FOODS, LLC in 320 COMMERCE STREET, YORK, NE 68467 (NAICS 311612). OSHA activity number 347264517.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Crystal Lake Foods, LLC — free Get an email when a new federal OSHA severe-injury report for Crystal Lake Foods, LLC is published. One employer, no account, unsubscribe in one click.
Site address
320 COMMERCE STREET
City
YORK
State
NE
ZIP
68467
Mailing
320 COMMERCE STREET, YORK, NE 68467
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311612
Employees
13
Ownership type
A

4 citations on file for this inspection.

1910.28 B06 I

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 11, 2024
Abate by
May 7, 2024
Penalty
Initial $3,918 · Current $2,351 Reduced
29 CFR 1910.28(b)(6)(i): The employer did not ensure that each employee less than 4 feet (1.2 m) above dangerous equipment is protected from falling into or onto the dangerous equipment by a guardrail system or a travel restraint system, unless the equipment is covered or guarded to eliminate the hazard.  On or about February 7th, 2024, employees engaged in meat processing operations located at 320 Commerce Street, York, Nebraska 68467 were being exposed to amputation hazards in that the feed hopper that contains an auger was not protected from an employee falling into or onto the internal components of the auger.  Employees would be required to access the stairwell and look directly over the hopper looking for foreign material or meat that was stuck in the auger.
Recent events (2)
  • — I (S) $2350.8
  • — Z (S) $3918

1910.178 A04

Serious Gravity 5 1 instance 2 exposed
Issued
Apr 11, 2024
Abate by
May 7, 2024
Penalty
Initial $3,134 · Current $1,880 Reduced
29 CFR  1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval:  On or about February 7th, 2024, employees engaged in material handling operations located at 320 Commerce Street, York, Nebraska, 68467 were being exposed to stuck-by hazards in that the employer pre-fabricated an in house forklift attachment that was designed to load combos as well as  the employer drilled two holes in the forks of the forklift without manufacturer approval.
Recent events (2)
  • — I (S) $1880.4
  • — Z (S) $3134

1910.305 B02 I

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 11, 2024
Abate by
May 7, 2024
Penalty
Initial $3,918 · Current $2,351 Reduced
29 CFR  1910.305(b)(2)(i): Each equipment control panel box in completed installations did not have a cover, faceplate, or fixture canopy:  On or about February 7th, 2024, employees engaged in meat packing operations located at 320 Commerce Street, York, Nebraska 68467, were being exposed to electrical hazards in that the control panel for the feed hopper was missing leaving live 120 volt electrical wiring exposed.
Recent events (2)
  • — I (S) $2350.8
  • — Z (S) $3918

1910.334 A02 I

Serious Gravity 1 1 instance 3 exposed
Issued
Apr 11, 2024
Abate by
May 7, 2024
Penalty
Initial $2,350 · Current $1,410 Reduced
29 CFR  1910.334(a)(2)(i): Portable cord and plug connected equipment were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket):  On or about February 7th 2024, employees engaged in meat packing operations located at 320 Commerce Street, York, Nebraska 68467 were being exposed to fire and electrical hazards in that a  damaged extension cord was being used near the vacuum sealing machine.
Recent events (2)
  • — I (S) $1410
  • — Z (S) $2350

View Crystal Lake Foods, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347264517.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.