ABBOTSFORD, WI —
OSHA Inspection: ALL METAL STAMPING INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ALL METAL STAMPING INC. in 411 WEST SPRUCE ST, ABBOTSFORD, WI 54405 (NAICS 332999). OSHA activity number 347265449.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALL METAL STAMPING INC.
- Site address
- 411 WEST SPRUCE ST
- City
- ABBOTSFORD
- State
- WI
- ZIP
- 54405
- Mailing
- 411 WEST SPRUCE ST, ABBOTSFORD, WI 54405
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 49
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.212 A01
- Issued
- Feb 21, 2024
- Abate by
- Mar 13, 2024
- Penalty
- Initial $8,228 · Current $4,937 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Northwest section of facility - Tool Room; Employees utilize a Buffalo drill press without guarding in place to prevent injuries from flying debris and/or the chuck/bit, respectively. (b) Northwest section of facility - Tool Room; Employees utilize various Bridgeport milling machines without guarding in place to prevent injuries from flying debris and/or the chuck/bit, respectively.
Recent events (2)
- — I (S) $4936.8
- — Z (S) $8228
1910.217 C02 I A
- Issued
- Feb 21, 2024
- Abate by
- Mar 13, 2024
- Penalty
- Initial $8,228 · Current $4,937 Reduced
General-duty citation text
29 CFR 1910.217(c)(2)(i)(a): Point of operation guard(s) on mechanical power press(es) did not prevent entry of hands or fingers into the point of operation by reaching through, over, under or around the guard(s): (a) Southern Press Area; A V&O 45ST (S/N: 45ST-228) punch press did not contain guarding on the north and south facing sides of the machine to prevent entry of hands or fingers into the point of operation.
Recent events (2)
- — I (S) $4936.8
- — Z (S) $8228
1910.217 C03 III F
- Issued
- Feb 21, 2024
- Penalty
- Initial $8,228 · Current $4,937 Reduced
General-duty citation text
29 CFR 1910.217(c)(3)(iii)(f): Mechanical power press(es) using presence sensing point of operation devices were not provided with guards to protect all areas of entry to the point of operation not protected by the presence sensing device(s): (a) Northern Press Area; The V&O Partsmaster punch press (#24) did not contain guarding on the east and west facing sides of the machine, leaving the point of operation exposed.
Recent events (2)
- — I (S) $4936.8
- — Z (S) $8228
More inspections at ALL Metal Stamping INC.
View ALL Metal Stamping INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347265449.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.