Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PROTECTOR MANAGEMENT CORP.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of PROTECTOR MANAGEMENT CORP. in 4625 VAN NESS STREET NW, WASHINGTON, DC 20016 (NAICS 236116). OSHA activity number 347269086.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Protector Management Corp. — free Get an email when a new federal OSHA severe-injury report for Protector Management Corp. is published. One employer, no account, unsubscribe in one click.
Site address
4625 VAN NESS STREET NW
City
WASHINGTON
State
DC
ZIP
20016
Mailing
8855 ANNAPOLIS RD. STE. 205, LANHAM, MD 20706
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
236116
Employees
15
Ownership type
A

5 citations on file for this inspection.

1926.102 A01

Serious Gravity 10 1 instance 3 exposed
Issued
Aug 5, 2024
Abate by
Aug 13, 2024
Penalty
Initial $6,033 · Current $6,033
29 CFR  1926.102(a)(1):Employees did not use eye and face protection equipment when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:  a) On or about February 8, 2024, at a worksite located at 4625 Van Ness Street NW, second floor; employees engaged in framing were not wearing eye protection provided while operating pneumatic tools such as nail guns.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet), in addition, documentation demonstrating the abatement is complete must be included with your certification.  This documentation may include but is not limited to evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $6033

1926.403 B02

Serious Gravity 5 1 instance 7 exposed
Issued
Aug 5, 2024
Abate by
Aug 13, 2024
Penalty
Initial $3,448 · Current $3,448
29 CFR  1926.403(b)(2):Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification:  a) On or about February 8, 2024, at a worksite located at 4625 Van Ness Street NW, second floor, employees engaged in residential construction activities were using an electrical non-metallic wall box designed to be mounted as an outlet extension cord exposing the employees to a shock hazard.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet), in addition, documentation demonstrating the abatement is complete must be included with your certification.  This documentation may include but is not limited to evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $3448

1926.404 B01 II

Serious Gravity 5 1 instance 7 exposed
Issued
Aug 5, 2024
Abate by
Aug 13, 2024
Penalty
Initial $0 · Current $0
29 CFR  1926.404(b)(1)(ii):On a construction site, where an assured equipment grounding program was not utilized, all 120-volt, single-phase, 15 and 20 ampere receptacle outlets which were not a part of the permanent wiring of the building or structure and which are in use by employees did not have approved ground fault circuit interrupters for personal protection.  a) On or about February 8, 2024, at a worksite located at 4625 Van Ness Street NW, first-floor area, employees were exposed to electrical shock while operating portable electrical equipment such as circular saws that were not connected to a ground-fault circuit interrupter while framing the residential home.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet), in addition, documentation demonstrating the abatement is complete must be included with your certification.  This documentation may include but is not limited to evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $0

1926.405 B02

Serious Gravity 5 1 instance 7 exposed
Issued
Aug 5, 2024
Abate by
Aug 13, 2024
Penalty
Initial $3,448 · Current $3,448
29 CFR  1926.405(b)(2):In energized installations, each outlet box did not have a cover, faceplate, or fixture canopy:  a) On or about February 8, 2024, at a worksite located at 4625 Van Ness Street NW, first-floor area, employees were exposed to electrical shock while plugging portable electrical equipment such as compressors and saws into outlets with missing faceplates.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet), in addition, documentation demonstrating the abatement is complete must be included with your certification.  This documentation may include but is not limited to evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $3448

1926.501 B13

Repeat Gravity 10 1 instance 7 exposed
Issued
Aug 5, 2024
Abate by
Aug 13, 2024
Penalty
Initial $12,066 · Current $12,066
29 CFR  1926.501(b)(13):Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   a) On or about February 8, 2024, at a worksite located at 4625 Van Ness Street NW, second floor, employees were observed walking the top plate while installing the trusses on the residential home without fall protection in place to protect them, falling approximately 20 feet to ground level.  b) On or about February 8, 2024, at a worksite located at 4625 Van Ness Street NW, first-floor area, the stairs used to access the upper floor were not protected with railing, exposing the employees to a 10-foot fall to the wooden deck below.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet), in addition, documentation demonstrating the abatement is complete must be included with your certification.  This documentation may include but is not limited to evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.  The Protector Construction was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR  1926.501(b)(13), which was contained in OSHA inspection number 1443591, citation number 1, item number 1 and was affirmed as a final order on (9/8/2020, with respect to a workplace located at 246 11th Street NE Washington DC 20010.
Recent events (1)
  • — Z (R) $12066

View Protector Management Corp.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347269086.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.