PONCA CITY, OK —
OSHA Inspection: MJ&H FABRICATION INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of MJ&H FABRICATION INC. in 2120 HALL BLVD., PONCA CITY, OK 74601 (NAICS 332420). OSHA activity number 347270050.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MJ&H FABRICATION INC.
- Site address
- 2120 HALL BLVD.
- City
- PONCA CITY
- State
- OK
- ZIP
- 74601
- Mailing
- 2120 HALL BLVD., PONCA CITY, OK 74601
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332420
- Employees
- 52
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.134 D01 III
- Issued
- Aug 2, 2024
- Abate by
- Aug 23, 2024
- Penalty
- Initial $6,857 · Current $6,857
General-duty citation text
29 CFR 1910.134(d)(1)(iii): The employer did not identify and evaluate the respiratory hazard(s) in the workplace; including a reasonable estimate of employee exposures to respiratory hazards and identification of the contaminant's chemical state and physical form: On or about February 6, 2024, the respiratory hazard evaluation did not include a reasonable estimate of employee exposures during welding, grinding, and arc gouging, when employees were required to wear elastomeric half face respirators.
Recent events (2)
- — I (S) $6857
- — Z (S) $6857
1910.134 E01
- Issued
- Aug 2, 2024
- Abate by
- Aug 23, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: On or about February 6, 2024, employees required to wear elastomeric half face respirators during welding, grinding, and arc gouging have not received the required respiratory medical evaluation.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 H01
- Issued
- Aug 2, 2024
- Abate by
- Aug 23, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(h)(1): Respirators were not cleaned and disinfected using the procedures in Appendix B-2 of 29 CFR 1910.134 or equivalent procedures recommended by the respirator manufacturer: On or about February 6, 2024, half mask elastomeric respirators being worn by employees during welding, grinding and arc gouging are not being kept clean.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.252 A02 IV
- Issued
- Aug 2, 2024
- Abate by
- Aug 23, 2024
- Penalty
- Initial $6,857 · Current $0 Reduced
General-duty citation text
29 CFR 1910.252(a)(2)(iv): The individual responsible for authorizing cutting or welding operations did not designate precautions to be followed in granting authorization to proceed preferably in the form of a written permit: On or about February 6, 2024, and at times prior thereto, at the shop, designated precautions to be followed did not include adequate mechanical ventilation requirements for each employee welding in tanks and vessels.
Recent events (2)
- — I (O) $0
- — Z (S) $6857
1910.252 B04 IV
- Issued
- Aug 2, 2024
- Abate by
- Aug 23, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
1910.252(b)(4)(iv): Where the welder must enter a confined space through a manhole or other small opening, means were not provided for quickly removing the welder in case of emergency. On or about February 6, 2024, and at times prior thereto, rescue and emergency retrieval equipment was not provided and required to be used while employees were performing welding operations inside vessels and tanks.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.1026 D01
- Issued
- Aug 2, 2024
- Abate by
- Aug 23, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1026(d)(1): The employer with a workplace or work operation covered by this standard did not determine the 8-hour time-weighted average exposure for each employee exposed to chromium (VI): On or about February 6, 2024, at the shop, where employees did cutting, welding, and grinding on stainless steel, the 8-hour time-weighted average exposure for each employee exposed to chromium (VI) was not determined.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at MJ&H Fabrication INC.
View MJ&H Fabrication INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332420)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347270050.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.