OSHA Inspection: JACINTO PEREZ PONCE

Issued

Feb 14, 2024

Abate by

Feb 23, 2024

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.  At the job site, employees were not provided eye protection when operating a Dewalt masonry saw while cutting bricks and stone were exposed to eye injuries from flying objects.

Issued

Feb 14, 2024

Abate by

Mar 14, 2024

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1926.300(b)(1): When power operated tools are designed to accommodate guards, they shall be equipped with such guards when in use.  At the jobsite, employees operating a Dewalt  14" masonry saw was equipped with a guard but was wedged with a wood block, while cutting concrete stone/brick, exposing employees to amputation hazards.

Issued

Feb 14, 2024

Abate by

Feb 26, 2024

Penalty

Initial $5,531 · Current $5,531

General-duty citation text

29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.  At the construction site, the employer did not ensure that employees using a Dewalt masonry saw to cut bricks/stone were protected from being exposed to silica dust with the use of engineering controls, work practices and respiratory protection.   Jacinto Perez Ponce was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.1153(c)(1), which was contained in OSHA inspection number 1549320, citation number 1, item number 2 and was affirmed as a final order on 09/20/2021, with respect to a workplace located at 468 Country Meadow Blvd, WAXAHACHIE, TX 75165.   This case file went to U.S. Treasury for collection with the penalty amount of $1,050.16.

Issued

Feb 14, 2024

Abate by

Feb 26, 2024

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section:  At the residential construction site, the employer did not assess the exposure for employees using a Dewalt masonry saw, exposing employees to potentially silica.  Jacinto Perez Ponce was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.1153(d)(2)(i), which was contained in OSHA inspection number 1549320, citation number 1, item number 3 and was affirmed as a final order on 09/20/2021, with respect to a workplace located at 468 Country Meadow Blvd, WAXAHACHIE, TX 75165.   This case file went to U.S. Treasury for collection with the penalty amount of $1,050.16.

Issued

Feb 14, 2024

Abate by

Mar 14, 2024

Penalty

Initial $1,382 · Current $1,382

General-duty citation text

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (Construction Reference: 1926.59)(a)   The employer had not developed a written hazard communication program for employees using a masonry saw to cut bricks. Employees were potentially exposed to respirable crystalline silica.   Jacinto Perez Ponce was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.1200(e)(1), which was contained in OSHA inspection number 1549320, citation number 1, item number 1 and was affirmed as a final order on 09/20/2021, with respect to a workplace located at 468 Country Meadow Blvd, WAXAHACHIE, TX 75165.   This case file went to U.S. Treasury for collection with the penalty amount of $1,050.16.