FLOWER MOUND, TX —
OSHA Inspection: CESAR MORALES
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of CESAR MORALES in 3909 GRACE PEARL, FLOWER MOUND, TX 75022 (NAICS 238140). OSHA activity number 347272841.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CESAR MORALES
- Site address
- 3909 GRACE PEARL
- City
- FLOWER MOUND
- State
- TX
- ZIP
- 75022
- Mailing
- 4009 COMANCHE STREET, FORT WORTH, TX 76119
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 11
- Ownership type
- A
Citations
7 citations on file for this inspection.
1926.100 A
- Issued
- Feb 14, 2024
- Abate by
- Mar 14, 2024
- Penalty
- Initial $3,687 · Current $3,687
General-duty citation text
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns. At the jobsite, employees were not wearing hardhats while working below other employees that were bricking a residential house, exposing employees to struck-by hazards from falling objects.
Recent events (1)
- — Z (S) $3687
1926.451 B01
- Issued
- Feb 14, 2024
- Abate by
- Mar 14, 2024
- Penalty
- Initial $6,452 · Current $6,452
General-duty citation text
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii). At the construction site, employees were working on a welded frame scaffold that was not fully planked. The employees performing masonry activities were exposed to a 12 feet fall hazard.
Recent events (1)
- — Z (S) $6452
1926.451 E01
- Issued
- Feb 14, 2024
- Abate by
- Feb 23, 2024
- Penalty
- Initial $3,687 · Current $3,687
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used. Cross braces were used as a means of access. At the construction site, employees were working on a welded frame scaffold without ladder access. The employees used the cross bracing to access and egress the scaffold system and exposed to a fall hazard.
Recent events (1)
- — Z (S) $3687
1926.451 G04 I
- Issued
- Feb 14, 2024
- Abate by
- Mar 14, 2024
- Penalty
- Initial $4,610 · Current $4,610
General-duty citation text
29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms. At the construction site, employees were working on a welded frame scaffold without guardrails. The employees performing masonry activities were exposed to a 12 feet fall hazard.
Recent events (1)
- — Z (S) $4610
1926.1153 C01
- Issued
- Feb 14, 2024
- Abate by
- Mar 14, 2024
- Penalty
- Initial $3,687 · Current $3,687
General-duty citation text
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section. At the construction site, the employer did not ensure that employees using a Dewalt masonry saw to cut bricks/stone were protected from being exposed to silica dust with the use of engineering controls, work practices and respiratory protection.
Recent events (1)
- — Z (S) $3687
1926.1153 D02 I
- Issued
- Feb 14, 2024
- Abate by
- Mar 14, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section: At the residential construction site, the employer did not assess the exposure for employees using a Dewalt masonry saw, exposing employees to potentially silica.
Recent events (1)
- — Z (S) $0
1926.454 A
- Issued
- Feb 14, 2024
- Abate by
- Mar 14, 2024
- Penalty
- Initial $518 · Current $518
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. At the construction site, employees were working on a welded frame scaffold without training to recognize and remove hazards and exposed to being struck by material falling from above and fall hazards.
Recent events (1)
- — Z (O) $518
More inspections at Cesar Morales
View Cesar Morales's full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347272841.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.