BELLEFONTE, PA —
OSHA Inspection: QMAC-QUALITY MACHINING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of QMAC-QUALITY MACHINING, INC. in 622 EAST ROLLING RIDGE DRIVE PENN EAGLE INDUSTRIAL PARK, BELLEFONTE, PA 16823 (NAICS 332710). OSHA activity number 347281099.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- QMAC-QUALITY MACHINING, INC.
- Site address
- 622 EAST ROLLING RIDGE DRIVE PENN EAGLE INDUSTRIAL PARK
- City
- BELLEFONTE
- State
- PA
- ZIP
- 16823
- Mailing
- 622 EAST ROLLING RIDGE DRIVE PENN EAGLE INDUSTRIAL PARK, BELLEFONTE, PA 16823
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 55
- Ownership type
- A
Citations
4 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 9, 2024
- Abate by
- Aug 2, 2024
- Penalty
- Initial $4,936 · Current $6,000
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: a) 622 East Rolling Ridge Drive, Bellefonte, PA 16823, employees were working on machinery without applying the necessary hazard controls, on or about February 14, 2024. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $6000
- — C (S) $4936
- — Z (S) $4936
1910.147 C06 I
- Issued
- Jul 9, 2024
- Abate by
- Aug 12, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed. a) 622 East Rolling Ridge Drive, Bellefonte, PA 16823, employees were performing service and maintenance activities including, but not limited to, setup, on equipment including, but not limited to, press brakes, and the employer did not perform periodic inspections of the energy control procedure(s), on or about February 14, 2024. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.147 C07 I
- Issued
- Jul 9, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: a) 622 East Rolling Ridge Drive, Bellefonte, PA 16823, employees were performing service and maintenance activities including, but not limited to, setup, on equipment including, but not limited to, press brakes, and did have authorized employee training, on or about February 14, 2024. b) 622 East Rolling Ridge Drive, Bellefonte, PA 16823, employees were performing service and maintenance activities including, but not limited to, setup, on equipment including, but not limited to, press brakes, and employees did have affected employee training, on or about February 14, 2024. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.212 A03 II
- Issued
- Jul 9, 2024
- Abate by
- Aug 2, 2024
- Penalty
- Initial $8,712 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposed an employee to injury was not guarded. a) 622 East Rolling Ridge Drive, Bellefonte, PA 16823, employees were operating a press brake that had an adjustable tool tip light curtain guarding device that was not properly adjust to the bottom of the upper tooling at the point of operation, on or about February 14, 2024. Abatement certification required within 15 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $0
- — C (S) $8712
- — Z (S) $8712
More inspections in this industry (NAICS 332710)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347281099.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.