Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

ARCANUM, OH —

OSHA Inspection: THE JORDAN COMPANY, L.P.

Complaint inspection · Safety discipline

At a glance

On , OSHA opened a complaint safety inspection of THE JORDAN COMPANY, L.P. in 1050 LANDSDOWNE AVE, ARCANUM, OH 45304 (NAICS 325211). OSHA activity number 347299075.

Watch THE Jordan Company, L.P. — free Get an email when a new federal OSHA severe-injury report for THE Jordan Company, L.P. is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
THE JORDAN COMPANY, L.P.
Site address
1050 LANDSDOWNE AVE
City
ARCANUM
State
OH
ZIP
45304
Mailing
1050 LANDSDOWNE AVE, ARCANUM, OH 45304

What kind of inspection was it?

Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
325211
Employees
56
Ownership type
A

Citations

3 citations on file for this inspection.

1910.141 A03 I

Deleted Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $10140.00 · Current $0.00 Reduced

General-duty citation text

29 CFR  1910.141(a)(3)(i):All places of employment shall be kept clean to the extent that the nature of the work allows.  a) On or about February 8, 2024, the employer did not ensure the work floor around line 10 was kept clear in that the scrap plastic from the line (trim strip) was pulled along the floor for approximately 10ft where employees worked between the line and the grinder feed at the front of the line.
Recent events (2)
  • — I (S) $0
  • — Z (S) $10140

1910.212 A01

Serious Gravity 10 1 instance 4 exposed
Issued
Penalty
Initial $16131.00 · Current $7000.00 Reduced

General-duty citation text

29 CFR  1910.212(a)(1):Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices, electronic safety devices, etc.  a) On or about February 2, 2024, the employer did not ensure the slitter knives on line 1 were guarded to prevent employees from touching the cutting blade during operation in that the slitter knife guards were not secured in place and could flip up.  b) On or about February 8, 2024, the employer did not ensure the slitter knives on line 11 were guarded to prevent employees from coming into contact with the blade.
Recent events (2)
  • — I (S) $7000
  • — Z (S) $16131

1910.212 A02

Deleted Serious Gravity 10 1 instance 3 exposed
Issued
Penalty
Initial $16131.00 · Current $0.00 Reduced

General-duty citation text

29 CFR  1910.212(a)(2):General requirements for machine guards. Guards shall be affixed to the machine where possible and secured elsewhere if for any reason attachment to the machine is not possible. The guard shall be such that it does not offer an accident hazard in itself.  a) On or about January 27, 2024, the employer did not ensure the kickback guards on the DeWalt table saws used by employees to make plastic retains did not cause a hazard in that an employee's right index fingertip was amputated when it was caught by the serrated kickback guard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $16131

More inspections in this industry (NAICS 325211)

More inspections in OH

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347299075.