TWINSBURG, OH —
OSHA Inspection: S & B METAL PRODUCTS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of S & B METAL PRODUCTS, INC. in 2060 CASE PARKWAY NORTH, TWINSBURG, OH 44087 (NAICS 332312). OSHA activity number 347308405.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- S & B METAL PRODUCTS, INC.
- Site address
- 2060 CASE PARKWAY NORTH
- City
- TWINSBURG
- State
- OH
- ZIP
- 44087
- Mailing
- 2060 CASE PARKWAY NORTH, TWINSBURG, OH 44087
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 35
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.38 F
- Issued
- Apr 16, 2024
- Abate by
- Jun 3, 2024
- Penalty
- Initial $4,839 · Current $3,144 Reduced
General-duty citation text
29 CFR 1910.38(f): The employer did not review the emergency action plan with each employee covered by the plan in accordance with 1910.38(f)(1) through (f)(3). On or about February 27, 2024, the employer had a written emergency evacuation plan in place involving full evacuation in the event of an emergency like a fire, however the employer did not train employees on the plan.
Recent events (2)
- — I (S) $3144
- — Z (S) $4839
1910.147 C04 I
- Issued
- Apr 16, 2024
- Abate by
- Jul 1, 2024
- Penalty
- Initial $8,067 · Current $5,244 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section. On or about February 27, 2024, the employer did not establish machine-specific energy control procedures for the control of hazardous energy to protect employees performing service and maintenance on equipment such as, but not limited to the press brake, mechanical rollers, and hydraulic rollers.
Recent events (2)
- — I (S) $5244
- — Z (S) $8067
1910.147 C07 I A
- Issued
- Apr 16, 2024
- Abate by
- Jul 1, 2024
- Penalty
- Initial $8,067 · Current $5,244 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation. On or about February 27, 2024, the employer did not provide training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation to employees authorized to perform service and maintenance on equipment such as, but not limited to the press brake, mechanical rollers, and hydraulic rollers.
Recent events (2)
- — I (S) $5244
- — Z (S) $8067
1910.178 L04 III
- Issued
- Apr 16, 2024
- Abate by
- Jul 1, 2024
- Penalty
- Initial $9,680 · Current $6,292 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years. On or about February 27, 2024, the employer did not ensure powered industrial truck operators were evaluated at least once every three years. The employer had operator training records for training dated September and October 2021.
Recent events (2)
- — I (S) $6292
- — Z (S) $9680
1910.178 M05 III
- Issued
- Apr 16, 2024
- Abate by
- Jul 1, 2024
- Penalty
- Initial $11,292 · Current $7,340 Reduced
General-duty citation text
29 CFR 1910.178(m)(5)(iii): Powered industrial truck(s), with the operator dismounted and within 25 feet of the truck still in his view, did not have the load engaging means fully lowered, controls neutralized, or brakes set. On or about February 16, 2024, the employer did not ensure a powered industrial truck operator who dismounted the truck (Nissan Model CPH01A15V Serial No. CPH01-920903) to adjust a metal carriage on top of a welding table within reach of the forks and while within 25 feet of the truck in view, had the load engaging means fully lowered, controls neutralized, and brakes set.
Recent events (2)
- — I (S) $7340
- — Z (S) $11292
1910.178 P01
- Issued
- Apr 16, 2024
- Penalty
- Initial $11,292 · Current $7,340 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition. On or about February 16, 2024, the employer did not ensure the Nissan Model CPH01A15V, S/N CPH01-920903 powered industrial truck with a defective parking brake was removed from service until it was restored to safe operating condition.
Recent events (2)
- — I (S) $7340
- — Z (S) $11292
1910.178 Q07
- Issued
- Apr 16, 2024
- Abate by
- May 10, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service. On or about February 27, 2024, the employer did not ensure powered industrial trucks were examined for deficiencies prior to be placed in service before each shift.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.132 D02
- Issued
- Apr 16, 2024
- Abate by
- Jun 3, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, the identity of the workplace evaluated, the person certifying that the evaluation had been performed, and the date the hazard assessment was done. On or about February 27, 2024, the employer did not have a written certification of hazard assessment. Employees were exposed to hazards during the fabrication of metal products.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at S & B Metal Products, INC.
View S & B Metal Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347308405.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.