DICKINSON, ND —
OSHA Inspection: T & L CUSTOM CABINETRY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of T & L CUSTOM CABINETRY in 4050 1ST STREET SOUTHWEST, DICKINSON, ND 58601 (NAICS 337110). OSHA activity number 347315046.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- T & L CUSTOM CABINETRY
- Site address
- 4050 1ST STREET SOUTHWEST
- City
- DICKINSON
- State
- ND
- ZIP
- 58601
- Mailing
- 4050 1ST STREET SOUTHWEST, DICKINSON, ND 58601
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 2
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Jun 5, 2024
- Penalty
- Initial $3,457 · Current $2,074 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices, electronic safety devices, etc. (a) On February 29, 2024, at 4050 1st Street SW in Dickinson, North Dakota, employees were exposed to amputation and entanglement hazards while operating drill presses that was missing a guard.
Recent events (2)
- — I (S) $2074.2
- — Z (S) $3457
1910.213 C01
- Issued
- Jun 5, 2024
- Abate by
- Jul 24, 2024
- Penalty
- Initial $3,457 · Current $2,074 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: (a) On February 29, 2024, at 4050 1st Street SW in Dickinson, North Dakota, employees were exposed to amputation hazards while operating a Grizzly 10" table saw to rip various solid wood materials in the process of fabricating cabinets and other wood products.
Recent events (2)
- — I (S) $2074.2
- — Z (S) $3457
1910.213 C02
- Issued
- Jun 5, 2024
- Abate by
- Jul 10, 2024
- Penalty
- Initial $2,765 · Current $1,659 Reduced
General-duty citation text
29 CFR 1910.213(c)(2): Handfed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: (a) On February 29, 2024, at 4050 1st Street Southwest in Dickinson, North Dakota employees are exposed to kickback hazards while operating a Grizzly 10" table saw to rip various solid wood materials in the process of fabricating cabinets and other wood products.
Recent events (2)
- — I (S) $1659
- — Z (S) $2765
1910.213 C03
- Issued
- Jun 5, 2024
- Abate by
- Jul 24, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs designed to provide adequate holding power for all thicknesses of materials being cut: (a) On February 29, 2024, at 4050 1st Street Southwest in Dickinson, North Dakota employees are exposed to kickback hazards while operating a Grizzly 10" table saw to rip various solid wood materials in the process of fabricating cabinets and other wood products.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.22 A03
- Issued
- Jun 5, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(a)(3): 29 CFR 1910.22(a)(3): The employer did not ensure that walking-working surfaces are maintained free of hazards such as sharp or protruding objects, loose boards, corrosion, leaks, spills, snow, and ice. (a) On February 29, 2024, at 4050 1st Street SW in Dickinson, North Dakota, in front of the 2 electrical panels multiple cords and the dust extracting hose are exposing the employees to fall hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at T & L Custom Cabinetry
View T & L Custom Cabinetry's full OSHA safety record →
More inspections in this industry (NAICS 337110)
More inspections in ND
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347315046.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.