ATLANTA, GA —
OSHA Inspection: MULHERN BELTING, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of MULHERN BELTING, INC. in 6125 XAVIER DRIVE SW, ATLANTA, GA 30336 (NAICS 423840). OSHA activity number 347325540.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MULHERN BELTING, INC.
- Site address
- 6125 XAVIER DRIVE SW
- City
- ATLANTA
- State
- GA
- ZIP
- 30336
- Mailing
- 148 BAUER DR, OAKLAND, NJ 07436
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423840
- Employees
- 9
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.138 A
- Issued
- Jun 24, 2024
- Abate by
- Jul 23, 2024
- Penalty
- Initial $10,648 · Current $7,737 Reduced
General-duty citation text
29 CFR 1910.138(a):The employer did not select and require employee(s) to use appropriate hand protection when employees' hands were exposed to hazards such as those from skin absorption of harmful substances; severe cuts or lacerations; severe abrasion; punctures; chemical burns; thermal burns; and harmful temperature extremes. a) Warehouse Area; On or about March 6, 2024, and at times prior, employees were exposed to skin burns, in that the employer did not ensure employees who perform the cleating process on the V-Guide Machine were provided personal protective equipment, such as but not limited to, heat resistant gloves.
Recent events (2)
- — I (S) $7737
- — Z (S) $10648
1910.212 A01
- Issued
- Jun 24, 2024
- Abate by
- Jul 23, 2024
- Penalty
- Initial $10,648 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Warehouse Area; On or about March 6, 2024, and at times prior, the employer exposed employees to nip point hazards, in that a rotating wheel on the V-Guide Machine did not contain a method of machine guarding while employees perform the cleating process.
Recent events (2)
- — I (S) $0
- — Z (S) $10648
1910.219 F03
- Issued
- Jun 24, 2024
- Abate by
- Jul 23, 2024
- Penalty
- Initial $10,648 · Current $7,737 Reduced
General-duty citation text
29 CFR 1910.219(f)(3):Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed: a) Warehouse Area; On or about March 6, 2024, and at times prior, the employer exposed employees to nip point hazards, in that a sprocket wheel and chain less than 7 feet above the floor was not enclosed on the V-Guide Machine while employees perform the cleating process.
Recent events (2)
- — I (S) $7737
- — Z (S) $10648
1910.132 D01
- Issued
- Jun 24, 2024
- Abate by
- Jul 23, 2024
- Penalty
- Initial $996 · Current $996
General-duty citation text
29 CFR 1910.132(d)(1):The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE): a) Warehouse Area; On or about March 6, 2024, and at times prior, employees were exposed to thermal burns, in that the employer did not assess the workplace to determine if hazards were present while employees utilize the V-Guide machine.
Recent events (2)
- — I (O) $996
- — Z (O) $996
More inspections at Mulhern Belting, INC.
View Mulhern Belting, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 423840)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347325540.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.