TULSA, OK —
OSHA Inspection: H & R TRIM CARPENTRY LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of H & R TRIM CARPENTRY LLC in 505 EAST 2ND STREET SOUTH, TULSA, OK 74120 (NAICS 238350). OSHA activity number 347330110.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- H & R TRIM CARPENTRY LLC
- Site address
- 505 EAST 2ND STREET SOUTH
- City
- TULSA
- State
- OK
- ZIP
- 74120
- Mailing
- 9612 HECTORVILLE ROAD, MOUNDS, OK 74047
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238350
- Employees
- 25
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.300 B04 III
- Issued
- Jul 30, 2024
- Abate by
- Aug 23, 2024
- Penalty
- Initial $6,452 · Current $3,000 Reduced
General-duty citation text
29 CFR 1926.300(b)(4)(iii): Special handtools for placing and removing material were not such as to permit easy handling of material without the operator placing a hand in the danger zone. Such tools shall not be in lieu of other guarding required by this section, but can only be used to supplement protection provided. On or about February 27, 2024, in an apartment room at the eastside of the jobsite, an employee cut wood at a table saw without a handtool for placing or removing wood near the rotating saw blade.
Recent events (2)
- — I (S) $3000
- — Z (S) $6452
1904.4 A
- Issued
- Jul 30, 2024
- Abate by
- Aug 23, 2024
- Penalty
- Initial $922 · Current $0 Reduced
General-duty citation text
29 CFR 1904.4(a): The employer did not record each work-related fatality, injury or illness case that resulted in the general recording criteria on the OSHA Form 300 or equivalent. On or about March 5, 2024, and at times thereafter, the following employee work-related injury was not recorded on an OSHA Form 300 or equivalent for calendar year 2024: a. Employee finger amputation and finger cuts, on February 27, 2024, at a jobsite during wood cutting using a table saw resulting in medical treatment beyond first aid and missed workdays. Abatement Certification and Documentation is required.
Recent events (2)
- — I (O) $0
- — Z (O) $922
1904.29 B02
- Issued
- Jul 30, 2024
- Abate by
- Aug 23, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.29(b)(2): The employer did not fill out or correctly fill out an OSHA Form 301 or equivalent for each recordable injury or illness. On or about March 5, 2024, and at times thereafter, an OSHA Form 301 or equivalent was not completed for the following work-related injury: a. Employee finger amputation and finger cuts, on February 27, 2024, at a jobsite during wood cutting using a table saw resulting in medical treatment beyond first aid and missed workdays. Abatement Certification and Documentation is required.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1904.39 A02
- Issued
- Jul 30, 2024
- Abate by
- Aug 23, 2024
- Penalty
- Initial $4,610 · Current $2,000 Reduced
General-duty citation text
29 CFR 1904.39(a)(2):The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye. On or about February 27, 2024, an employee's work-related injury involving a table saw resulted in an amputation of the employee's left index finger and the incident was not reported to the local OSHA area office within the 24- hour reporting requirement.
Recent events (2)
- — I (O) $2000
- — Z (O) $4610
More inspections at H & R Trim Carpentry LLC
View H & R Trim Carpentry LLC's full OSHA safety record →
More inspections in this industry (NAICS 238350)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347330110.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.