Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

KEMAH, TX —

OSHA Inspection: SIMMONS CUSTOM RIGGING

Unprogrammed Related inspection · Safety discipline

At a glance

On , OSHA opened an unprogrammed Related safety inspection of SIMMONS CUSTOM RIGGING in 2332 ANDERS LN., KEMAH, TX 77565 (NAICS 336612). OSHA activity number 347331530.

Watch Simmons Custom Rigging — free Get an email when a new federal OSHA severe-injury report for Simmons Custom Rigging is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
SIMMONS CUSTOM RIGGING
Site address
2332 ANDERS LN.
City
KEMAH
State
TX
ZIP
77565
Mailing
2332 ANDERS LN., KEMAH, TX 77565

What kind of inspection was it?

Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
336612
Employees
22
Ownership type
A

Citations

4 citations on file for this inspection.

1910.212 A01

Deleted Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $5531.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1):  One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation and ingoing nip points:   a) On or about March 7, 2024, on the northwest side of the Aluminum/Welding Shop, where the Wilton 14" Vertical Bandsaw (Model 8201) blade was not guarded while employees cut boat parts.
Recent events (2)
  • — I (S) $0
  • — Z (S) $5531

1910.305 G02 II

Serious Gravity 5 1 instance 3 exposed
Issued
Penalty
Initial $5531.00 · Current $3319.00 Reduced

General-duty citation text

29 CFR  1910.305(g)(2)(ii):  Flexible cords were not used only in continuous lengths without splice or tap:   a) On or about March 7, 2024, on the northwest side of the Aluminum/Welding Fabrication Shop, where the flexible cord used to supply electricity to DeWalt angle grinder was spliced.
Recent events (2)
  • — I (S) $3318.6
  • — Z (S) $5531

1910.334 A02 II

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $5531.00 · Current $3319.00 Reduced

General-duty citation text

29 CFR  1910.334(a)(2)(ii):  There was a defect or evidence of damage that could have exposed an employee to injury and the defective or damaged item was not removed from service:   a) On or about March 7, 2024, on the northwest side of the Aluminum/Welding Fabrication Shop, where the employees operated a Dayton 6 x 9" Belt and Disc Sander to grind boat parts that had an altered electrical switch to power the equipment and it was not removed from service.
Recent events (2)
  • — I (S) $3318.6
  • — Z (S) $5531

1910.157 C01

Deleted Other-than-serious 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $518.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.157(c)(1):  Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries:  a) On or about March 7, 2024, on the northwest side of the Aluminum/Welding Facility, where an ABC Class fire extinguisher was not accessible to employees.
Recent events (2)
  • — I (O) $0
  • — Z (O) $518

More inspections at SIMMONS CUSTOM RIGGING

View SIMMONS CUSTOM RIGGING's full OSHA safety record →

More inspections in this industry (NAICS 336612)

More inspections in TX

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347331530.