WILMINGTON, DE —
OSHA Inspection: DIAMOND HILL, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of DIAMOND HILL, INC. in 317 N MARKET STREET, WILMINGTON, DE 19801 (NAICS 238110). OSHA activity number 347335739.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DIAMOND HILL, INC.
- Site address
- 317 N MARKET STREET
- City
- WILMINGTON
- State
- DE
- ZIP
- 19801
- Mailing
- 34 INDUSTRIAL BOULEVARD SUITE 104, NEW CASTLE, DE 19721
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238110
- Employees
- 5
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.21 B02
- Issued
- Sep 3, 2024
- Penalty
- Initial $5,531 · Current $0 Reduced
General-duty citation text
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe condition(s) and the regulation(s) applicable to his work environment to control or eliminate any hazard(s) or other exposure to illness or injury: a) 317 N Market Street Wilmington, DE 19801: On or about March 8, 2024, employees were not instructed on the recognition and avoidance of hazards including applicable regulations on the site which resulted in a building collapse resulting in injuries.
Recent events (2)
- — I (S) $0
- — Z (S) $5531
1926.703 A01
- Issued
- Sep 3, 2024
- Penalty
- Initial $6,452 · Current $0 Reduced
General-duty citation text
29 CFR 1926.703(a)(1): Formwork was not designed, fabricated, erected, supported, braced and maintained so that it would be capable of supporting without failure all vertical and lateral loads that could reasonably be anticipated to be applied to the form: a) 317 N Market Street Wilmington, DE 19801: On or about March 8, 2024, employees and subcontractors were exposed to a struck-by hazards while working in an area where shoring formwork poles were placed that did not meet the height requirements outlined in the construction drawings to support the Comslab decking being installed.
Recent events (2)
- — I (S) $0
- — Z (S) $6452
1926.703 B03
- Issued
- Sep 3, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.703(b)(3): Erected shoring equipment was not inspected immediately prior to, during, and immediately after concrete placement: a) 317 N Market Street Wilmington, DE 19801: On or about March 8, 2024, employees worked with erected shoring on the first floor that was not inspected immediately prior to and during the concrete pour. Subcontracted employees performed tasks such as but not limited to concrete work above the first-floor level resulted in a building collapse and employee injury.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.703 B05
- Issued
- Sep 3, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.703(b)(5): The sills for shoring were not sound, rigid, and capable of carrying the maximum intended load: a) 317 N Market Street Wilmington, DE 19801: On or about March 8, 2024, employees exposed employees to fall and struck by hazards while conducting concrete formwork activity in that, the sills/footing on which the formwork rested was not sound. Rather it rested on 5.5 inch ×5.5-inch timber that was erected on its end to support 700 series (PS 703) and (PS 706) shoring poles along with Kaufmann HT 20 plus timber. The 5.5 inch ×5.5-inch timber had not been properly braced to meet the design professional's specification. b) 317 N Market Street Wilmington, DE 19801: On or about March 8, 2024, employees exposed to fall and struck by hazards while conducting concrete formwork activity in that, the sills/footing on which the formwork rested was not sound. Rather it rested on 1.5-inch x 5.5-inch lumber that was stacked two high equaling 3 inches x 5.5 inches supporting 700 series (PS 703) shoring poles along with Kaufmann HT 20 plus timber
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.703 B06
- Issued
- Sep 3, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.703(b)(6): Base plates, shore heads, extension devices, and adjustment screws were not in firm contact, and secured, when necessary, with the foundation and the form: a) 317 N Market Street Wilmington, De 19801: On or about March 8, 2024, employees exposed to fall and struck by hazards while conducting concrete formwork activity in that, the shore heads on which the formwork rested was not sound or secure. Rather it rested on unrated timber pieces of wood stacked above the shore head frame causing the timber to be unstable.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Diamond Hill, INC.
View Diamond Hill, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238110)
More inspections in DE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347335739.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.