OSHA Inspection: MARK GOEBEL ENTERPRISES INC.

Issued

2025-04-16 00:00:00

Abate by

2025-06-03 00:00:00

Penalty

Initial $398.00 · Current $398.00

General-duty citation text

29 CFR  1903.19(c)(1):29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:   Mark Goebel Enterprises Inc., failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:   Citation Number                        Item number              Abatement Date 01                                                      01a                                 01-13-2025 01                                                      01b                                 01-13-2025 01                                                      01c                                 01-13-2025 01                                                      03a                                 01-13-2025 01                                                      03b                                 01-13-2025  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF THE CORRECTIVE ACTION WORKSHEET).

Issued

2024-06-11 00:00:00

Abate by

2025-01-13 00:00:00

Penalty

Initial $4839.00 · Current $2900.00 Reduced

Hazardous substances S103

General-duty citation text

29 CFR  1926.1153(c)(1): For each employee engaged in a task identified in Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.  a) On or about March 13, 2024, at the above addressed jobsite,  Mark Goebel Enterprises Inc. did not fully and properly implement engineering controls and work practices, as specified in Table 1 when using a EDCO HSS-14'' hardscape saw to cut step stones containing up to 20% of respirable crystalline silica (Quartz) without equipping the tool with a water delivery system that supplies a continuous stream or spray of water at the point of impact.

Issued

2024-06-11 00:00:00

Abate by

2025-01-13 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section:  a)  On or about March 13, 2024, at the above addressed jobsite,  Mark Goebel Enterprises Inc. did not assess the exposure to respirable crystalline silica of  employees cutting step stone containing up to 20%  respirable crystalline silica (Quartz).

Issued

2024-06-11 00:00:00

Abate by

2025-01-13 00:00:00

Penalty

Initial $4839.00 · Current $0.00 Reduced

Hazardous substances S103

General-duty citation text

29 CFR  1926.1153(g)(1):The employer did not established and implement a written exposure control plan that consists of at least the following elements:  (i) A description of the tasks in the workplace that involve exposure to respirable crystalline silica; (ii) A description of the engineering controls used to limit employee exposure to respirable crystalline silica for each task; (iii) A description of the housekeeping measures used to limit employee exposure to respirable crystalline silica ; and (iv)  A description of the procedures used to restrict access to work areas, when necessary, to minimize the number of employees exposed to respirable crystalline silica and their level of exposure.  a)  On or about March 13, 2024, at the above addressed jobsite,  Mark Goebel Enterprises Inc.  did not develop and implement a Silica Exposure Control Plan with an accurate description of all the tasks in the workplace that involved exposure to respirable crystalline silica. Exposure for this jobsite occurred when the employee(s) used an EDCO HSS-14'' hardscape saw to cut step stones containing up to 20% respirable crystalline silica (Quartz) without equipping the tool with a water delivery system that supplies a continuous stream or spray of water at the point of impact.

Issued

2024-06-11 00:00:00

Abate by

2025-01-13 00:00:00

Penalty

Initial $4839.00 · Current $2900.00 Reduced

General-duty citation text

29 CFR  1926.1153(i)(2)(i):The employer did not ensure that each covered employee could demonstrate knowledge and understanding of at least the information contained in paragraphs (A) - (F) of this section.  a) On or about  March 13, 2024,  at the above mentioned addressed jobsite the employer did not ensure that each employee was trained on the health hazards associated with silica, specific tasks where exposure could occur, protective measures including respiratory protection, work practices, and engineering controls, and the identity of the competent person. Employees were exposed to crystalline silica when cutting bricks containing up 20% crystalline silica (Quartz).

Issued

2024-06-11 00:00:00

Abate by

2025-01-13 00:00:00

Penalty

Initial $0.00 · Current $0.00

Hazardous substances S103

General-duty citation text

29 CFR  1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met.   a) On or about  March 13, 2024, at the above addressed jobsite, the employer did not develop or implement a written hazard communication program in accordance with 29 CFR 1910.1200 that describes at least the following:  1) Requirement for labeling of containers of hazardous chemicals: 2) Training of employees; 3) A complete list of hazardous chemicals known to be in the workplace; 4) Methods to inform employees of the hazards of non-routine tasks; and, 5) Methods to inform other employer(s) of material safety data sheets availability; the labeling system and any precautionary measures to protect employees.  Employees were exposed to hazardous chemicals while cutting stone containing up to 20% silica (quartz).