LITTLE ROCK, AR —
OSHA Inspection: INTERSTATE HIGHWAY SIGNS
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of INTERSTATE HIGHWAY SIGNS in 7415 LINDSEY RD, LITTLE ROCK, AR 72206 (NAICS 339950). OSHA activity number 347344772.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- INTERSTATE HIGHWAY SIGNS
- Site address
- 7415 LINDSEY RD
- City
- LITTLE ROCK
- State
- AR
- ZIP
- 72206
- Mailing
- 7415 LINDSEY RD, LITTLE ROCK, AR 72206
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339950
- Employees
- 85
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.217 B04 I
- Issued
- Sep 11, 2024
- Penalty
- Initial $11,292 · Current $5,646 Reduced
General-duty citation text
29 CFR 1910.217(b)(4)(i): Pedal mechanism(s) on mechanical power press(es) full revolution clutches were not protected to prevent unintended operation from falling or moving objects or by accidental stepping onto the pedals: On or about March 13, 2024, in the production area, employees were punching holes in signposts with a mechanical power press that had an unprotected foot pedal.
Recent events (2)
- — I (S) $5646
- — Z (S) $11292
1910.217 B04 II
- Issued
- Sep 11, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(b)(4)(ii): Mechanical power press(es) using full revolution clutches were not provided with a pad with a nonslip contact area firmly attached to the pedal: On or about March 13, 2024, in the production area, employees were punching holes in signposts with a mechanical power press that did not have nonslip padding on the pedal.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.217 C02 I A
- Issued
- Sep 11, 2024
- Penalty
- Initial $11,292 · Current $5,646 Reduced
General-duty citation text
29 CFR 1910.217(c)(2)(i)(a): Point of operation guard(s) on mechanical power press(es) did not prevent entry of hands or fingers into the point of operation by reaching through, over, under or around the guard(s): On or about March 13, 2024, in the production area, employees were punching holes in signposts with a mechanical power press that was not adequately guarded on the following instances: a) Die guard, front of press. b) Flywheel guard, right side of press.
Recent events (2)
- — I (S) $5646
- — Z (S) $11292
1910.217 G01
- Issued
- Sep 11, 2024
- Abate by
- Sep 30, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(g)(1): The employer did not, within 30 days of the occurrence, report to either the Director of the Directorate of Safety Standards Programs, OSHA, U.S. Department of Labor, Washington, D.C. 20210, or the State agency administering a plan approved by the Assistant Secretary of Labor for Occupational Safety and Health, all point of operation injuries to operators or other employees: On or about March 13, 2024, in the production area, an employee was hospitalized for a work-related injury sustained while using a mechanical power press. The employer did not report the injuries as required per the OSHA standard.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 G02 III
- Issued
- Sep 11, 2024
- Penalty
- Initial $906 · Current $453 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: On or about March 13, 2024, in the production area, employees were punching holes in signposts with a mechanical power press with a damaged power cord.
Recent events (2)
- — I (O) $453
- — Z (O) $906
More inspections in this industry (NAICS 339950)
More inspections in AR
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347344772.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.