Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: TERRY BECKER CONSTRUCTION L.L.C.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of TERRY BECKER CONSTRUCTION L.L.C. in 5555 51ST AVENUE SOUTH, FARGO, ND 58104 (NAICS 337212). OSHA activity number 347360703.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Terry Becker Construction L.L.C. — free Get an email when a new federal OSHA severe-injury report for Terry Becker Construction L.L.C. is published. One employer, no account, unsubscribe in one click.
Site address
5555 51ST AVENUE SOUTH
City
FARGO
State
ND
ZIP
58104
Mailing
P.O. BOX 10206, FARGO, ND 58106
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
337212
Employees
9
Ownership type
A

6 citations on file for this inspection.

1910.212 A03 I

Serious Gravity 5 2 instances 2 exposed
Issued
Jun 7, 2024
Abate by
Jul 12, 2024
Penalty
Initial $2,765 · Current $1,659 Reduced
29 CFR 1910.212(a)(3)(i): The point of operation of machines whose operation exposes an employee to injury, was not provided with guard which was in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, was so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle:    (a) On March 14, 2024, and times prior, in the vicinity of 5555 51st Avenue South in Fargo, North Dakota, employees were exposed to crush by hazards while operating shop machinery where no guarding was in place to prevent the employees body from being in the point of operation of:  Joos Panel Press Model HP 90 OKT; Serial # 20 710 89
Recent events (3)
  • — F (S) $1659
  • — C (S) $2765
  • — Z (S) $2765

1910.213 C01

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 7, 2024
Abate by
Jul 12, 2024
Penalty
Initial $3,457 · Current $2,074 Reduced
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:    (a) On March 14, 2024, and times prior, in the vicinity of 5555 51st Avenue South in Fargo, North Dakota, employees were exposed to amputation hazards while engaged in wood ripping operations using a table saw without the use of a blade guard.
Recent events (3)
  • — F (S) $2074
  • — C (S) $3457
  • — Z (S) $3457

1910.213 C02

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 7, 2024
Abate by
Jul 12, 2024
Penalty
Initial $0 · Current $0
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator:    (a) On March 14, 2024, and times prior, in the vicinity of 5555 51st Avenue South in Fargo, North Dakota, employees were exposed to struck by hazards while engaged in wood ripping operations using a table saw without the use of a spreader to prevent binding of the blade .
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1910.213 C03

Serious Gravity 10 1 instance 2 exposed
Issued
Jun 7, 2024
Abate by
Jul 12, 2024
Penalty
Initial $0 · Current $0
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator:     (a) On March 14, 2024, and times prior, in the vicinity of 5555 51st Avenue South in Fargo, North Dakota, employees were exposed to amputation hazards while engaged in wood ripping operations using a table saw without the use of anti-kickback fingers or dogs.
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1910.242 B

Other-than-serious 1 instance 2 exposed
Issued
Jun 7, 2024
Abate by
Jul 12, 2024
Penalty
Initial $388 · Current $233 Reduced
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.:    (a) On March 14, 2024,  and times prior, at or near 5555 51st Avenue South in Fargo, North Dakota, employees were exposed to injection and/or flying debris hazards while using compressed air, to blow wood chips from machines and materials, at pressures above 30 p.s.i.
Recent events (3)
  • — F (O) $233
  • — C (O) $388
  • — Z (O) $388

1910.132 D01

Other-than-serious 1 instance 2 exposed
Issued
Jun 7, 2024
Abate by
Jul 12, 2024
Penalty
Initial $0 · Current $0
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE):    (a) On March 14, 2024, and times prior, at or near 5555 51st Avenue South in Fargo, North Dakota, employees were  exposed to potential injuries while engaged in door and millwork manufacturing where the employer did not assess the workplace to determine if hazards were present which necessitated the use of personal protective equipment.
Recent events (3)
  • — F (O) $0
  • — C (O) $0
  • — Z (O) $0

View Terry Becker Construction L.L.C.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347360703.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.