BLUE ISLAND, IL —
OSHA Inspection: C-V CUSTOM COUNTERTOPS & CABINETS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of C-V CUSTOM COUNTERTOPS & CABINETS, INC. in P.O. BOX 87 12525 IRVING AVENUE, BLUE ISLAND, IL 60406 (NAICS 337110). OSHA activity number 347370314.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- C-V CUSTOM COUNTERTOPS & CABINETS, INC.
- Site address
- P.O. BOX 87 12525 IRVING AVENUE
- City
- BLUE ISLAND
- State
- IL
- ZIP
- 60406
- Mailing
- P.O. BOX 87 12525 IRVING AVENUE, BLUE ISLAND, IL 60406
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 9
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.36 D01
- Issued
- May 16, 2024
- Abate by
- Jun 12, 2024
- Penalty
- Initial $2,765 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge. a. On or about March 26, 2024, in the woodworking department, a fire exit door was locked from the inside, thereby exposing employees to hazards associated with fire or other emergency evacuation hazards.
Recent events (2)
- — I (S) $1500
- — Z (S) $2765
1910.37 A03
- Issued
- May 16, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed. a. On or about March 26, 2024, in the woodworking area, a fire exit door was obstructed by material, interfering with employees' safe and orderly evacuation from building in the event of an emergency. Employees were thereby exposed to the hazards associated with fire, smoke or other emergency evacuation hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C01
- Issued
- May 16, 2024
- Penalty
- Initial $4,839 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut. a. On or about March 26, 2024, in the woodworking area, employees were required to operate the SawStop woodworking table saw, Model ICS53230, Serial #I103101033 without an equipped hood guard, thereby exposing employees to amputation hazards associated with a rotating saw blade. b. On or about March 26, 2024, in the woodworking area, employees were required to operate the SawStop woodworking table saw, Model ICS53230, Serial #I132801381 without an equipped hood guard, thereby exposing employees to amputation hazards associated with a rotating saw blade.
Recent events (2)
- — I (S) $2500
- — Z (S) $4839
1910.213 C03
- Issued
- May 16, 2024
- Abate by
- Jun 12, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non-kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. a. On or about March 26, 2024, in the woodworking area, the employer did not ensure that the SawStop woodworking table saw, Model ICS53230, Serial #I103101033 was equipped with non-kickback fingers to prevent employees from being struck by flying material. Employees were thereby exposed to struck-by hazards associated with a rotating saw blade. b. On or about March 26, 2024, in the woodworking area, the employer did not ensure that the SawStop woodworking table saw, Model ICS53230, Serial #I132801381 was equipped with non-kickback fingers to prevent employees from being struck by flying material. Employees were thereby exposed to struck-by hazards associated with a rotating saw blade.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at C-V Custom Countertops & Cabinets, INC.
View C-V Custom Countertops & Cabinets, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337110)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347370314.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.