FRIEDENSBURG, PA —
OSHA Inspection: ZIMMERMAN MACHINE, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ZIMMERMAN MACHINE, INC. in 6 SOUTH SPRUCE STREET, FRIEDENSBURG, PA 17933 (NAICS 332710). OSHA activity number 347372526.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ZIMMERMAN MACHINE, INC.
- Site address
- 6 SOUTH SPRUCE STREET
- City
- FRIEDENSBURG
- State
- PA
- ZIP
- 17933
- Mailing
- P. O. BOX 208, FRIEDENSBURG, PA 17933
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 24
- Ownership type
- A
Citations
2 citations on file for this inspection.
1910.147 C04 I
- Issued
- May 29, 2024
- Penalty
- Initial $3,318 · Current $2,488 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Building #1 - On or about March 26, 2024, lockout/tagout procedures were not documented on the Doosan Lynx 220 LY CNC machine, exposing employees to amputation hazards. b) Building #1 - On or about March 26, 2024, lockout/tagout procedures were not documented on the Doosan Lynx 2100 LY CNC machine, exposing employees to amputation hazards. c) Building #1 - On or about March 26, 2024, lockout/tagout procedures were not documented on the Doosan Lynx 2100 LSY CNC machine, exposing employees to amputation hazards. d) Building #1 - On or about March 26, 2024, lockout/tagout procedures were not documented on the Doosan DNM 5700 mill machine, exposing employees to amputation hazards. e) Building #1 - On or about March 26, 2024, lockout/tagout procedures were not documented on the Doosan DNM 750L CNC mill machine, exposing employees to amputation hazards. f) Building #1 - On or about March 26, 2024, lockout/tagout procedures were not documented on the Doosan DRN 750II CNC mill machine, exposing employees to amputation hazards. g) Building #1 - On or about March 26, 2024, lockout/tagout procedures were not documented on the Doosan DNM 5700 CNC mill machine, exposing employees to amputation hazards. h) Building #1 - On or about March 26, 2024, lockout/tagout procedures were not documented on the Doosan DNM 4500 CNC mill machine, exposing employees to amputation hazards. CORRECTED DURING INSPECTION
Recent events (2)
- — I (S) $2488
- — Z (S) $3318
1910.212 A01
- Issued
- May 29, 2024
- Penalty
- Initial $4,149 · Current $3,112 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by: a) Building #1 - On or about March 26, 2024, interlocks were disabled making machine guarding not adequate on the Doosan Lynx 220 LY CNC machine, exposing employees to amputation hazards. b) Building #1 - On or about March 26, 2024, interlocks were disabled making machine guarding not adequate on the Doosan Lynx 2100 LY CNC machine, exposing employees to amputation hazards. c) Building #1 - On or about March 26, 2024, interlocks were disabled making machine guarding not adequate on the Doosan Lynx 2100 LSY CNC machine, exposing employees to amputation hazards. d) Building #1 - On or about March 26, 2024, interlocks were disabled making machine guarding not adequate on the Doosan DNM 5700 mill machine, exposing employees to amputation hazards. e) Building #1 - On or about March 26, 2024, interlocks were disabled making machine guarding not adequate on the Doosan DNM 750L CNC mill machine, exposing employees to amputation hazards. f) Building #1 - On or about March 26, 2024, interlocks were disabled making machine guarding not adequate on the Doosan DRN 750II CNC mill machine, exposing employees to amputation hazards. g) Building #1 - On or about March 26, 2024, interlocks were disabled making machine guarding not adequate on the Doosan DNM 5700 CNC mill machine, exposing employees to amputation hazards. h) Building #1 - On or about March 26, 2024, interlocks were disabled making machine guarding not adequate on the Doosan DNM 4500 CNC mill machine, exposing employees to amputation hazards. i) Building #1 - On or about March 26, 2024, employees are exposed to amputation hazards from the point of operation on the Monarchi lathe, with an unguarded chuck. CORRECTED DURING INSPECTION
Recent events (2)
- — I (S) $3112
- — Z (S) $4149
More inspections at Zimmerman Machine, INC.
View Zimmerman Machine, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347372526.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.