LOCKPORT, NY —
OSHA Inspection: M CARTER DECOR
Unprogrammed Related inspection · Health discipline
At a glance
On , OSHA opened an unprogrammed Related health inspection of M CARTER DECOR in 41 EAST MAIN STREET SUITE 201, LOCKPORT, NY 14094 (NAICS 238330). OSHA activity number 347373532.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- M CARTER DECOR
- Site address
- 41 EAST MAIN STREET SUITE 201
- City
- LOCKPORT
- State
- NY
- ZIP
- 14094
- Mailing
- 360 WEST AVENUE, LOCKPORT, NY 14094
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238330
- Employees
- 3
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.1200 E01
- Issued
- Jun 27, 2024
- Abate by
- Sep 3, 2024
- Penalty
- Initial $2,074 · Current $1,250 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a) 41 East Main Street, Lockport, NY - On or about 3/15/2024 , the employer did not develop and implement a written hazard communication program for employee who work with materials such as, but not limited to Ardex Feather Finish (containing calcium aluminate cement, limestone, portland cement, and crystalline silica), and Henry 650R Releasable Bond Pressure Sensitive Adhesive (containing acrylic polymers, oils and rosins). A written program should include descriptions of how the criteria for: 1) Labeling and other forms of warning, 2) Safety Data Sheets AND 3) Employee information and training will be met. Additionally, a list of hazardous chemicals known to be present in the workplace must be compiled. Methods used to inform employees of the hazards associated with non-routine tasks and the informing of contractors of workplace hazards must also be addressed. The written program must be made available upon request. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $1250
- — Z (S) $2074
1910.1200 E02
- Issued
- Jun 27, 2024
- Abate by
- Sep 3, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(2): The employer, that used hazardous chemicals at the workplace in such a way that employees of other employer(s) were exposed, did not ensure that the hazard communication program included all of the elements outlined in 29 CFR 1910.1200(e)(2)(i) through 29 CFR 1910.1200(e)(2)(iii): a) 41 East Main Street, Lockport, NY - On or about 3/15/2024, the employer did not develop and implement those portions of a hazard communication program in order to ensure that employees, of other employers, were properly protected and informed of the hazards that they were exposed to. The employer used materials such as, but not limited to Ardex Feather Finish (containing calcium aluminate cement, limestone, portland cement, and crystalline silica), and Henry 650R Releasable Bond Pressure Sensitive Adhesive (containing acrylic polymers, oils and rosins).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 H01
- Issued
- Jun 27, 2024
- Abate by
- Sep 3, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard was introduced into their work area. a) a) 41 East Main Street, Lockport, NY - On or about 3/15/2024 , the employer did not develop and implement a written hazard communication program for employee who work with materials such as, but not limited to Ardex Feather Finish (containing calcium aluminate cement, limestone, portland cement, and crystalline silica), and Henry 650R Releasable Bond Pressure Sensitive Adhesive (containing acrylic polymers, oils and rosins). Employees shall be informed of the following: 1) The requirements of this section; 2) Any operations where hazardous chemicals are present; AND 3) The location and availability of the written Hazard Communication Program, list(s) of hazardous chemicals, and Safety Data Sheets. Employee training shall include at least: 1) Methods and observations that may be used to detect the presence or release of a hazardous chemical in the work area. 2) The physical and health hazards of the chemicals in the work area. 3) The measures employees can take to protect themselves such as specific procedures, appropriate work practices, emergency procedures and personal protective equipment to be used. 4) The details of the employers Hazard Communication Program including an explanation of labeling systems, Safety Data Sheets, and how employees can obtain and use the appropriate hazard information. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 238330)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347373532.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.