MENASHA, WI —
OSHA Inspection: MORENO ROOFING LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MORENO ROOFING LLC in N8881 DUBLIN PASS, MENASHA, WI 54952 (NAICS 238160). OSHA activity number 347373995.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MORENO ROOFING LLC
- Site address
- N8881 DUBLIN PASS
- City
- MENASHA
- State
- WI
- ZIP
- 54952
- Mailing
- W7002 SPRING ROAD, GREENVILLE, WI 54942
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 4
- Ownership type
- A
Citations
4 citations on file for this inspection.
1903.19 D01
- Issued
- Aug 29, 2024
- Abate by
- Sep 27, 2024
- Penalty
- Initial $518 · Current $518
General-duty citation text
29 CFR 1903.19(d)(1):The employer must submit to the Agency, along with the information on abatement certification required by paragraph (c)(3) of this section, documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required. The employer did not provide abatement certification and documentation as required for citations issued on April 4, 2024.
Recent events (1)
- — Z (O) $518
1926.501 B13
- Issued
- Apr 4, 2024
- Penalty
- Initial $6,452 · Current $6,452
General-duty citation text
29 CFR 1926.501(b)(13): "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer shall develop and implement a fall protection plan which meets the requirements of paragraph (k) of 1926.502. Note: There is a presumption that it is feasible and will not create a greater hazard to implement at least one of the above-listed fall protection systems. Accordingly, the employer has the burden of establishing that it is appropriate to implement a fall protection plan which complies with 1926.502(k) for a particular workplace situation, in lieu of implementing any of those systems. On or about March 27, 2024, with respect to a jobsite located at N8881 Dublin Pass in Menasha, Wisconsin, employees were exposed to fall hazards of ten feet and greater while installing shingles on a steep pitched roof without fall protection.
Recent events (1)
- — Z (S) $6452
1926.503 A01
- Issued
- Apr 4, 2024
- Abate by
- May 2, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1):The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards. On or about March 27, 2024, with respect to a jobsite located at N8881 Dublin Pass in Menasha, Wisconsin, the employer did not ensure that each employee had received training to identify fall hazards and the methods to be used to mitigate those hazards.
Recent events (1)
- — Z (S) $0
1926.1053 B01
- Issued
- Apr 4, 2024
- Penalty
- Initial $6,452 · Current $6,452
General-duty citation text
29 CFR 1926.1053(b)(1): When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grab-rail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support. On or about March 27, 2024, with respect to a jobsite located at N8881 Dublin Pass, Menasha, WI, employees were using an extension ladder to access/egress a roof surface at eleven feet one inch above surface level without the ladder extended at least three feet above the roof edge.
Recent events (1)
- — Z (S) $6452
More inspections at Moreno Roofing LLC
View Moreno Roofing LLC's full OSHA safety record →
More inspections in this industry (NAICS 238160)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347373995.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.