SOUTH BRISTOL, ME —
OSHA Inspection: GAMAGE SHIPYARD, LLC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of GAMAGE SHIPYARD, LLC. in 6 GAMAGE DRIVE, SOUTH BRISTOL, ME 04568 (NAICS 336612). OSHA activity number 347386393.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GAMAGE SHIPYARD, LLC.
- Site address
- 6 GAMAGE DRIVE
- City
- SOUTH BRISTOL
- State
- ME
- ZIP
- 04568
- Mailing
- 6 GAMAGE DRIVE, SOUTH BRISTOL, ME 04568
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336612
- Employees
- 4
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.212 B
- Issued
- Apr 22, 2024
- Penalty
- Initial $1,763 · Current $882 Reduced
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: Lower Work Building - The 8-inch STARK buffer was not securely anchored to the work bench to prevent walking or moving.
Recent events (2)
- — I (S) $881.5
- — Z (S) $1763
1910.213 C01
- Issued
- Apr 22, 2024
- Penalty
- Initial $4,148 · Current $2,074 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular hand-fed ripsaw(s) were not guarded by an automatically adjusting hood, which completely enclosed that portion of the saw above the table and above the material being cut: Lower Work Building - General Manufacturing Co. table saw, model 350, serial number X 7141, did not have an automatically adjusting guard that was installed.
Recent events (2)
- — I (S) $2074
- — Z (S) $4148
1910.213 C02
- Issued
- Apr 22, 2024
- Abate by
- Jun 7, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Each hand-fed circular ripsaw was not furnished with a spreader to prevent material from squeezing the saw blade and being thrown back on the operator: Lower Work Building - General Manufacturing Co. table saw, model 350, serial number X 7141, did not have a spreader installed to prevent material from squeezing the saw blade and being thrown back on the operator.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Apr 22, 2024
- Abate by
- Jun 7, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed circular ripsaw(s) did not have non-kickback fingers, or dogs, so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: Lower Work Building - General Manufacturing Co. table saw, model 350, serial number X 7141, did not have non-kickback fingers or dogs installed to prevent material from being thrown back toward the operator.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 M01
- Issued
- Apr 22, 2024
- Penalty
- Initial $2,939 · Current $1,470 Reduced
General-duty citation text
29 CFR 1910.213(m)(1): Cutting heads of a wood shaper(s) were not enclosed with a cage or adjustable guard so designed to keep the operator's hand away from the cutting edge: Lower Work Building - A router was set up on a homemade table without a guard to keep the operator's hands away from the cutting edge.
Recent events (2)
- — I (S) $1469.5
- — Z (S) $2939
1910.215 B09
- Issued
- Apr 22, 2024
- Penalty
- Initial $3,457 · Current $1,729 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue, or the end of the safety guard peripheral member, at the top exceeded one fourth inch: Lower Work Building - The 8-inch JET bench grinder, serial number 18041475, had the adjustable tongue guard set at approximately three quarters of an inch.
Recent events (2)
- — I (S) $1728.5
- — Z (S) $3457
1915.134 B
- Issued
- Apr 22, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1915.134(b): Work rest(s) on grinding machinery were not kept within one eighth inch of the surface of the wheel: Lower Work Building - The work rest on the 8-inch JET bench grinder, serial number 18041475, was approximately one quarter of an inch.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1915.507 B01
- Issued
- Apr 22, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1915.507(b)(1): Portable fire extinguishers and/or hose systems were not selected, installed, inspected, maintained, and tested by the employer according to NFPA 10-2002 Standard for Portable Fire Extinguishers: Facility - Portable fire extinguishers were not inspected and maintained in accordance with NFPA 10-2002: Standard for Portable Fire Extinguishers in the following instances: a) Portable fire extinguishers were not inspected monthly as required in Section 6.2.1 in accordance with procedures in Section 6.2.2. b) Inspection records were not developed for monthly inspections in accordance with 6.2.4.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Gamage Shipyard, LLC.
View Gamage Shipyard, LLC.'s full OSHA safety record →
More inspections in this industry (NAICS 336612)
More inspections in ME
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347386393.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.