LUCK, WI —
OSHA Inspection: DUREX PRODUCTS, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of DUREX PRODUCTS, INC. in 112 WEST FIRST AVENUE P.O. BOX 319, LUCK, WI 54853 (NAICS 332999). OSHA activity number 347404659.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DUREX PRODUCTS, INC.
- Site address
- 112 WEST FIRST AVENUE P.O. BOX 319
- City
- LUCK
- State
- WI
- ZIP
- 54853
- Mailing
- 112 WEST FIRST AVENUE P.O. BOX 319, LUCK, WI 54853
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 74
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Aug 7, 2024
- Abate by
- Sep 29, 2025
- Penalty
- Initial $9,598 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Wire mat finishing area; On or about April 9, 2024, and dates prior, the infeed side guard on a Cincinnati shear (Model 4310, No. 23789) did not prevent workers from accessing material hold-downs and/or the blade during operation because it had an opening approximately 8-inches wide x 4-inches high on the right side.
Recent events (3)
- — F (O) $1000
- — C (S) $9598
- — Z (S) $9598
1910.303 B07 I
- Issued
- Aug 7, 2024
- Abate by
- Sep 29, 2025
- Penalty
- Initial $5,485 · Current $12,713
General-duty citation text
29 CFR 1910.303(b)(7)(i): Unused openings in boxes, raceways, auxiliary gutters, cabinets, equipment cases, or housings were not effectively closed to afford protection substantially equivalent to the wall of the equipment: (a) Urethane department, table 2; On or about April 9, 2024, and dates prior, unused openings in an electrical cabinet beneath urethane table 2 were not effectively closed as required.
Recent events (3)
- — F (S) $12713
- — C (S) $5485
- — Z (S) $5485
1910.303 G02 I
- Issued
- Aug 7, 2024
- Abate by
- Sep 29, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i): (a) Urethane department, table 2 and 3; On or about April 9, 2024, and dates prior, energized electrical conductors were exposed beneath urethane tables because the conductor wires were spliced together with twist-on wire connectors (wire nuts) outside of an approved electrical cabinet or enclosure.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.305 G02 III
- Issued
- Aug 7, 2024
- Penalty
- Initial $8,228 · Current $0 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: (a) Press 1 feeder area; On or about April 9, 2024, and dates prior, strain relief was not provided for the flexible cord on a hand-held rebar cutting tool.
Recent events (3)
- — F (S) $0
- — C (S) $8228
- — Z (S) $8228
1910.147 C06 II
- Issued
- Aug 7, 2024
- Abate by
- Sep 29, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(ii): The employer did not certify that periodic inspections of the energy control procedures had been performed: (a) Throughout the facility; On or about April 9, 2024, and dates prior, a record of certification was not maintained for the periodic evaluation of lockout procedures for equipment including, but not limited to; Looms, Cincinnati shear (Model 4310, No. 23789), Press 1 feeder, AIDA 220-ton punch press (model NC1-2000(2)E), and Press 1 cut-off.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at Durex Products, INC.
View Durex Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347404659.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.