KARNES CITY, TX —
OSHA Inspection: RED EWALD
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RED EWALD in 2669 SOUTH HWY 181, KARNES CITY, TX 78118 (NAICS 326199). OSHA activity number 347408106.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RED EWALD
- Site address
- 2669 SOUTH HWY 181
- City
- KARNES CITY
- State
- TX
- ZIP
- 78118
- Mailing
- 2669 SOUTH HIGHWAY 181, KARNES CITY, TX 78118
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- Employees
- 29
- Ownership type
- A
Citations
12 citations on file for this inspection.
1910.134 E01
- Issued
- Oct 4, 2024
- Abate by
- Oct 24, 2024
- Penalty
- Initial $11,292 · Current $0 Reduced
General-duty citation text
29 CFR 1910.134(e)(1):The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: On or about April 10, 2024, and times prior to, the employer did not ensure employees who were required to wear half face respirators were medically evaluated.
Recent events (3)
- — F (S) $0
- — C (S) $11292
- — Z (S) $11292
1910.134 F02
- Issued
- Oct 4, 2024
- Abate by
- Oct 24, 2024
- Penalty
- Initial $11,292 · Current $0 Reduced
General-duty citation text
29 CFR 1910.134(f)(2):The employer did not ensure that an employee using a tight-fitting respirator was fit tested prior to initial use of the respirator, whenever a different respirator facepiece was used, and at least annually thereafter: On or about April 10, 2024, and times prior to, the employer did not ensure employees who are required to wear tight-fitting respirators when working with hazardous chemicals such as but not limited to Styrene, Acetones and Methyl Ethyl Ketone Peroxide were fit tested.
Recent events (3)
- — F (S) $0
- — C (S) $11292
- — Z (S) $11292
1910.146 C05 II C
- Issued
- Oct 4, 2024
- Abate by
- Oct 24, 2024
- Penalty
- Initial $11,292 · Current $0 Reduced
General-duty citation text
29 CFR 1910.146(c)(5)(ii)(C):Before an employee entered the confined space, the internal atmosphere was not tested with a calibrated direct-reading instrument for oxygen content, for flammable gases and vapors, and for potential toxic air contaminants, in that order: On or about April 10, 2024, and times prior, the employer did not ensure employees entering a confined space used a calibrated direct-reading instrument, to test oxygen content and potential toxic air contaminants.
Recent events (3)
- — F (S) $0
- — C (S) $11292
- — Z (S) $11292
1910.157 E03
- Issued
- Oct 4, 2024
- Abate by
- Oct 24, 2024
- Penalty
- Initial $9,680 · Current $0 Reduced
General-duty citation text
29 CFR 1910.157(e)(3):Portable fire extinguishers were not subjected to an annual maintenance check: On or about April 10, 2024, and times prior to, the employer did not ensure portable fire extinguishers were annually inspected to ensure fire extinguishers operated effectively and safely.
Recent events (3)
- — F (S) $0
- — C (S) $9680
- — Z (S) $9680
1910.178 L01 I
- Issued
- Oct 4, 2024
- Penalty
- Initial $11,292 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i):The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): On or about April 10, 2024, and at times prior to, the employer did not ensure employees operating the powered industrial truck were trained and certified.
Recent events (3)
- — F (S) $0
- — C (S) $11292
- — Z (S) $11292
1910.213 I01
- Issued
- Oct 4, 2024
- Penalty
- Initial $11,292 · Current $0 Reduced
General-duty citation text
29 CFR 1910.213(i)(1):All portions of the saw blade was not enclosed or guarded, except for the working portion of the blade between the bottom of the guide rolls and the table. The guard for the portion of the blade between the sliding guide and the upper-saw-wheel guard did not protect the saw blade at the front and outer side. This portion of the guard shall be self-adjusting to raise and lower with the guide. The upper-wheel guard shall be made to conform to the travel of the saw on the wheel: On or about April 10, 2024, and times prior to, in the fitting bay the employer did not ensure unused portions of the saw blade on the Rockwell Delta Band Saw was enclosed or guarded as required. This condition exposed employees to amputation hazards.
Recent events (3)
- — F (S) $0
- — C (S) $11292
- — Z (S) $11292
1910.215 A02
- Issued
- Oct 4, 2024
- Abate by
- Oct 15, 2024
- Penalty
- Initial $11,292 · Current $0 Reduced
General-duty citation text
29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, and flange projections: On or about April 10, 2024, and times prior to, in the maintenance area the employer did not ensure the abrasive wheel on the bench grinder had a wheel guard.
Recent events (3)
- — F (S) $0
- — C (S) $11292
- — Z (S) $11292
1910.215 A04
- Issued
- Oct 4, 2024
- Abate by
- Oct 15, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4):Grinding machinery was not used with work rest(s) to support offhand grinding work: On or about April 10, 2024, and times prior to, in the maintenance area the employer did not ensure the abrasive wheel bench grinder was equipped with a work rest.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.215 B09
- Issued
- Oct 4, 2024
- Abate by
- Oct 15, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9):The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one-fourth inch: On or about April 10, 2024, and times prior to, in the maintenance area, employees used an abrasive wheel bench grinder that was not equipped with a tongue guard.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.1200 F06
- Issued
- Oct 4, 2024
- Abate by
- Oct 24, 2024
- Penalty
- Initial $9,680 · Current $0 Reduced
General-duty citation text
29 CFR 1910.1200(f)(6):The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the information specified under paragraphs (f)(6)(i) through (ii) of this section: On or about April 10, 2024, and times prior to, the employer did not ensure that each secondary container of hazardous chemicals throughout the workplace were labeled, tagged or marked with the product identifier, signal word, hazard statement(s), pictogram(s), precautionary statement(s). Instance a: Fitting Bay (1 unlabeled container) Instance b: Maintenance Shop (2 unlabeled containers) Instance c: Nozzle Shop (3 unlabeled containers)
Recent events (3)
- — F (S) $0
- — C (S) $9680
- — Z (S) $9680
1904.40 A
- Issued
- Oct 4, 2024
- Penalty
- Initial $1,613 · Current $0 Reduced
General-duty citation text
29 CFR 1904.40(a):The employer did not provide copies of the records kept under part 1904-Recording and Reporting Occupational Injuries and Illnesses- within four (4) hours when an authorized representative of the Commissioner asked for the records: On or about April 10, 2024, and times prior to, the employer failed to provide copies within four (4) business hours of OSHA Forms 300 and 300-A or their equivalents, which were requested for calendar years 2021, 2022, 2023 and up to date 2024.
Recent events (3)
- — F (O) $0
- — C (O) $1613
- — Z (O) $1613
1910.303 G01 II
- Issued
- Oct 4, 2024
- Abate by
- Oct 24, 2024
- Penalty
- Initial $906 · Current $0 Reduced
General-duty citation text
29 CFR 1910.303(g)(1)(ii):Working space around electric equipment rated 600 volts, nominal, or less was used for storage: On or about April 10, 2024, and times prior to, the employer did not ensure the area in front of the electrical breaker panels were kept free of material. Instance a: Mechanical Area panel box was blocked by pipes, boxes and other items Instance b: Aquacultural Warehouse blocked by pipes, bucket, broom and other items
Recent events (3)
- — F (O) $0
- — C (O) $906
- — Z (O) $906
More inspections at RED Ewald
View RED Ewald's full OSHA safety record →
More inspections in this industry (NAICS 326199)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347408106.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.