Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: RGL CONSTRUCTION INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of RGL CONSTRUCTION INC. in 210 AIRPORT RD., NORTH AURORA, IL 60542 (NAICS 238160). OSHA activity number 347412272.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch RGL Construction INC. — free Get an email when a new federal OSHA severe-injury report for RGL Construction INC. is published. One employer, no account, unsubscribe in one click.
Site address
210 AIRPORT RD.
City
NORTH AURORA
State
IL
ZIP
60542
Mailing
8604 44TH PL., LYONS, IL 60534
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
10
Ownership type
A

2 citations on file for this inspection.

1926.501 B10

Serious Gravity 10 1 instance 2 exposed
Issued
May 9, 2024
Abate by
May 23, 2024
Penalty
Initial $6,452 · Current $3,500 Reduced
29 CFR  1926.501(b)(10):"Roofing work on Low-slope roofs." Except as otherwise provided in paragraph (b) of this section, each employee engaged in roofing activities on low-slope roofs, with unprotected sides and edges 6 feet (1.8 m) or more above lower levels shall be protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system. Or, on roofs 50-feet (15.25 m) or less in width (see Appendix A to subpart M of this part), the use of a safety monitoring system alone [i.e. without the warning line system] is permitted.  On or about April 15, 2024, employees performing roofing operations on a flat roof were not protected from a fall while working outside the warning lines, exposing employees to a 20- foot fall.  Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (S) $3500
  • — Z (S) $6452

1926.503 B01

Other-than-serious 1 instance 3 exposed
Issued
May 9, 2024
Abate by
Jun 7, 2024
Penalty
Initial $0 · Current $0
29 CFR  1926.503(b)(1):The employer shall verify compliance with paragraph (a) of this section by preparing a written certification record. The written certification record shall contain the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer. If the employer relies on training conducted by another employer or completed prior to the effective date of this section, the certification record shall indicate the date the employer determined the prior training was adequate rather than the date of actual training.  On or about April 15, 2024  the employer did not certify in writing  fall training provided to employees performing commercial roofing operations at heights exceeding six feet.   Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347412272.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.