Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: STARS INDOOR SPORTS, LLC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of STARS INDOOR SPORTS, LLC. in 6124 BUSCH BOULEVARD, COLUMBUS, OH 43229 (NAICS 713940). OSHA activity number 347413767.

Watch Stars Indoor Sports, LLC. — free Get an email when a new federal OSHA severe-injury report for Stars Indoor Sports, LLC. is published. One employer, no account, unsubscribe in one click.
Site address
6124 BUSCH BOULEVARD
City
COLUMBUS
State
OH
ZIP
43229
Mailing
6124 BUSCH BOULEVARD, COLUMBUS, OH 43229
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
713940
Employees
17
Ownership type
A

5 citations on file for this inspection.

1926.451 F07

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $8067.00 · Current $8067.00
29 CFR 1926.451(f)(7): Scaffolds shall be erected, moved, dismantled, or altered only under the supervision and direction of a competent person qualified in scaffold erection, moving, dismantling or alteration. Such activities shall be performed only by experienced and trained employees selected for such work by the competent person.  a. On or about April 8, 2024, the employer did not ensure that a Buffalo Tools Pro-Series (Model no. TOWERINT3; Item no. 2603653) multi-use baker-style scaffold was erected and used under the supervision and direction of a competent person.  An employee that was not experienced and trained for such work to the level of a competent person assembled and used the scaffold failing to utilize parts of the scaffold that include but were not limited to guardrails which exposed the employee to a fall hazard of approximately 20 feet.
Recent events (2)
  • — I (S) $8067
  • — Z (S) $8067

1926.451 G01

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet (3.1 m) above a lower level shall be protected from falling to that lower level. Paragraphs (g)(1)(i) through (vii) of this section establish the types of fall protection to be provided to the employees on each type of scaffold. Paragraph (g)(2) of this section addresses fall protection for scaffold erectors and dismantlers.  a. On or about April 8, 2024, an employee was on the top platform of a Buffalo Tools Pro-Series (Model no. TOWERINT3; Item no. 2603653) multi-use baker-style scaffold at heights of approximately 20 feet without guardrails installed or any other means of fall protection/prevention in use. As a result, the employee was exposed to a fall hazard of approximately 20 feet.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.454 A

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $8067.00 · Current $0.00 Reduced
29 CFR 1926.454(a): The employer shall have each employee who performs work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards.   a. On or about April 8, 2024, the employer did not ensure that employees performing work from the Buffalo Tools Pro-Series (Model no. TOWERINT3; Item no. 2603653) multi-use baker-style scaffold were provided sufficient training on information such as, but not limited to, fall hazards, the proper use of the scaffold, the correct procedure for erecting the fall protection systems and ways to minimize the hazards associated with scaffold usage. As a result, an employee was exposed to a fall hazard of up to approximately 20 feet.
Recent events (2)
  • — I (S) $0
  • — Z (S) $8067

1926.454 B

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.454(b): The employer shall have each employee who is involved in erecting, disassembling, moving, operating, repairing, maintaining, or inspecting a scaffold trained by a competent person to recognize any hazards associated with the work in question. The training shall include the following topics, as applicable:  a. On or about April 8, 2024, an employee was directed to erect a Buffalo Tools Pro-Series (Model no. TOWERINT3; Item no. 2603653) multi-use baker-style scaffold that was not provided with competent person level training prior. As a result, an unsafe scaffold was erected and utilized, exposing the employee to a fall hazard of up to approximately 20 feet.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1904.40 A

Other-than-serious 1 instance 30 exposed
Issued
Abate by
Penalty
Initial $1613.00 · Current $1000.00 Reduced
29 CFR  1904.40(a): Basic requirement. When an authorized government representative asks for the records you keep under Part 1904, you must provide copies of the records within four (4) business hours.   a. On or about April 15, 2024, and at times prior, the employer did not provide OSHA 300, 300-A, and 301 forms for recordable injuries and illnesses when requested by an OSHA representative.
Recent events (2)
  • — I (O) $1000
  • — Z (O) $1613

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347413767.