ROCHESTER, NY —
OSHA Inspection: BURKE FORGING & HEAT TREATING, INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BURKE FORGING & HEAT TREATING, INC in 30 SHERER STREET, ROCHESTER, NY 14611 (NAICS 332111). OSHA activity number 347418386.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BURKE FORGING & HEAT TREATING, INC
- Site address
- 30 SHERER STREET
- City
- ROCHESTER
- State
- NY
- ZIP
- 14611
- Mailing
- 30 SHERER STREET, ROCHESTER, NY 14611
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332111
- Employees
- 17
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.22 A02
- Issued
- May 10, 2024
- Abate by
- Jun 12, 2024
- Penalty
- Initial $2,350 · Current $1,763 Reduced
General-duty citation text
29 CFR 1910.22(a)(2): The employer did not ensure that the floor of each workroom is maintained in a clean and, to the extent feasible, in a dry condition. The employer did not ensure that when wet processes are used, drainage is be maintained and, to the extent feasible, dry standing places, such as false floors, platforms, and mats are provided. a) On or about 04/17/2024, throughout the facility; Employees were exposed to slip, trip, and fall hazards on wet floors from leaking roof. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $1762.5
- — Z (S) $2350
1910.147 C06 I
- Issued
- May 10, 2024
- Abate by
- Jun 12, 2024
- Penalty
- Initial $3,134 · Current $2,351 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) On or about 04/17/2024, throughout the facility, the employer did not conduct periodic inspections of the Lockout/Tagout procedures for machines such as, but not limited to: Horizontal Band saws 12, 17, 19, 20, and Hammer number 8. ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (S) $2350.5
- — Z (S) $3134
1910.147 C07 I A
- Issued
- May 10, 2024
- Abate by
- Jun 12, 2024
- Penalty
- Initial $2,350 · Current $1,763 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation. a) On or about 04/17/2024, in the Saw area; Employees that are required to Lockout machines such as, but not limited to, Horizontal Band Saws number 12, 17, 19, and 20, during maintenance or servicing activities such as changing blades, were not trained as authorized employees. ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (S) $1762.5
- — Z (S) $2350
More inspections at Burke Forging & Heat Treating, INC
View Burke Forging & Heat Treating, INC's full OSHA safety record →
More inspections in this industry (NAICS 332111)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347418386.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.