ARLINGTON HEIGHTS, IL —
OSHA Inspection: REAM ROOFING INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of REAM ROOFING INC. in 103 S DRYDEN PL, ARLINGTON HEIGHTS, IL 60004 (NAICS 238160). OSHA activity number 347434250.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- REAM ROOFING INC.
- Site address
- 103 S DRYDEN PL
- City
- ARLINGTON HEIGHTS
- State
- IL
- ZIP
- 60004
- Mailing
- 2212 W FARWELL AVE, CHICAGO, IL 60645
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 8
- Ownership type
- A
Citations
5 citations on file for this inspection.
1903.19 C01
- Issued
- Jan 2, 2025
- Abate by
- Jan 29, 2025
- Penalty
- Initial $388 · Current $388
General-duty citation text
29 CFR?1903.19(c)(1): The?employer did?not certify?to OSHA,?within 10?calendar days?after the?abatement date,?that the?cited violation?had been?abated: Lubomir Petrovsky dba Lubie Services, Inc., failed?to certify?to OSHA?within 10?calendar days?after the?abatement date?that each?of the?following cited?violations had?been corrected: Citation ?Number????????????????Item Number????????????????????????Abatement Date 01?????????????????????? ????2-b??????????? 10-31-2024 In?accordance with?29 CFR?1903.19(c), abatement?certification is?required for?this violation?(using the?CERTIFICATION OF?CORRECTIVE ACTION?WORKSHEET).
Recent events (1)
- — Z (O) $388
1926.100 A
- Issued
- Jul 24, 2024
- Abate by
- Aug 19, 2024
- Penalty
- Initial $2,765 · Current $2,765
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: a) On April 24, 2024, employees engaged in hoisting operations were exposed to struck-by hazards were not wearing hard hats. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (3)
- — A (S) $2765
- — I (S) $1500
- — Z (S) $2765
1926.501 B13
- Issued
- Jul 24, 2024
- Penalty
- Initial $4,839 · Current $4,839
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a) On April 24, 2024, employees performing roofing work were exposed to fall hazards of approximately 19.6 feet. No abatement certification or documentation is required for this item.
Recent events (3)
- — A (S) $4839
- — I (S) $3950
- — Z (S) $4839
1926.503 A01
- Issued
- Jul 24, 2024
- Abate by
- Oct 31, 2024
- Penalty
- Initial $4,839 · Current $4,839
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: a) On or about April 24, 2024, employees were exposed to fall hazards while performing roofing work and the employer did not provide a training program to recognize fall hazards and the procedures to be followed in order to minimize those hazards. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
- — A (S) $4839
- — I (S) $0
- — Z (S) $4839
1926.552 A01
- Issued
- Jul 24, 2024
- Penalty
- Initial $2,765 · Current $2,765
General-duty citation text
29 CFR 1926.552(a)(1): The employer did not comply with the manufacturer's specifications and limitations applicable to the operation of all hoists and elevators: a) On April 24, 2024, employees were exposed to fall hazards while using a material hoist as a ladder to access the roof. No abatement certification or documentation is required for this item.
Recent events (3)
- — A (S) $2765
- — I (S) $1800
- — Z (S) $2765
More inspections at Ream Roofing INC.
View Ream Roofing INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238160)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347434250.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.