OKARCHE, OK —
OSHA Inspection: SHAWNEE MILLING COMPANY
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SHAWNEE MILLING COMPANY in 20625 NORTH CALUMET ROAD, OKARCHE, OK 73762 (NAICS 424510). OSHA activity number 347440737.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SHAWNEE MILLING COMPANY
- Site address
- 20625 NORTH CALUMET ROAD
- City
- OKARCHE
- State
- OK
- ZIP
- 73762
- Mailing
- 20625 NORTH CALUMET ROAD, OKARCHE, OK 73762
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 424510
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.146 G01
- Issued
- Oct 18, 2024
- Abate by
- Nov 12, 2024
- Penalty
- Initial $11,524 · Current $6,914 Reduced
General-duty citation text
29 CFR 1910.146(g)(1): The employer did not provide training so that all employees whose work was regulated by 29 CFR 1910.146 (permit required confined spaces) acquired the understanding, knowledge, and skills necessary for the safe performance of the duties assigned under 29 CFR 1910.146:(a) a. On or about April 24, 2024, employees who enter boot pits were not aware of adequate air monitoring requirements prior to entry and did not acquire the understanding and knowledge to safely perform duties in permit required confined spaces such as boot pits.
Recent events (2)
- — I (S) $6914.4
- — Z (S) $11524
1910.157 C01
- Issued
- Oct 18, 2024
- Abate by
- Nov 12, 2024
- Penalty
- Initial $6,913 · Current $4,148 Reduced
General-duty citation text
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries. On or about April 24, 2024, portable fire extinguishers present in the following areas were not mounted and identified where employees did work tasks for grain handling: a. Dump house/grain delivery shed, east wall b. Dump house/grain delivery shed, southeast wall c. Bin #4 auger control room
Recent events (2)
- — I (S) $4147.8
- — Z (S) $6913
1910.272 M04
- Issued
- Oct 18, 2024
- Abate by
- Nov 12, 2024
- Penalty
- Initial $11,524 · Current $6,914 Reduced
General-duty citation text
29 CFR 1910.272(m)(4): The employer did not implement procedures in the grain handling facility for the use of tags and locks which would prevent the inadvertent application of energy or motion to equipment being repaired, serviced, or adjusted, which could result in employee injury. Such locks and tags shall be removed in accordance with established procedures only by the employee installing them or, if unavailable, by his or her supervisor. On or about April 24, 2024, at Bin #4 auger control room, adequate procedures for the use of locks and tags were not implemented where a lock applied to an electrical switch for bin #4 auger did not identify the employee who applied the lock and the lock key was left unsecured at a wall.
Recent events (2)
- — I (S) $6914.4
- — Z (S) $11524
1910.23 B10
- Issued
- Oct 18, 2024
- Abate by
- Nov 12, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.23(b)(10): The employer did not ensure that any ladder with structural or other defects was immediately tagged "Dangerous: Do Not Use" or with similar language in accordance with 1910.145 and removed from service until repaired in accordance with 1910.22(d), or replaced: On or about April 24, 2024, the following fixed ladders were not immediately tagged "Dangerous: Do Not Use" or with similar language and were available for employee use: a. In the south boot pit, a fixed metal ladder that bent upward at the lower rungs. b. In the north boot pit, a fixed metal ladder was missing ladder rungs.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Shawnee Milling Company
View Shawnee Milling Company's full OSHA safety record →
More inspections in this industry (NAICS 424510)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347440737.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.