ROME, GA —
OSHA Inspection: LIVERETT FABRICATING COMPANY, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of LIVERETT FABRICATING COMPANY, INC. in 300 ADDINGTON DRIVE NW, ROME, GA 30165 (NAICS 332323). OSHA activity number 347449753.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LIVERETT FABRICATING COMPANY, INC.
- Site address
- 300 ADDINGTON DRIVE NW
- City
- ROME
- State
- GA
- ZIP
- 30165
- Mailing
- PO BOX 1793, ROME, GA 30162
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332323
- Employees
- 6
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.132 D01
- Issued
- Oct 23, 2024
- Penalty
- Initial $2,765 · Current $1,659 Reduced
General-duty citation text
29 CFR 1910.132(d)(1):The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). a) Big Shop Area; On or about May 1, 2024, and at times prior, employees were exposed to thermal burns, in that the employer did not assess the workplace to determine if hazards were present while employees conduct welding activities.
Recent events (2)
- — I (S) $1659
- — Z (S) $2765
1910.252 B03
- Issued
- Oct 23, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.252(b)(3): Employees exposed to the hazards created by welding, cutting, or brazing operations were not protected by personal protective equipment in accordance with the requirements of 29 CFR 1910.132: a) Big Shop Area; On or about May 1, 2024, and at times prior, employees were exposed to thermal burns, in that the employer did not provide personal protective equipment, such as arm protection, while employees conduct welding activities.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 K06
- Issued
- Oct 23, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(6):The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer: a) Big Shop Area; On or about May 1, 2024, and at times prior, the employer did not provide the basic advisory information on respirators presented in Appendix D prior to employees voluntarily using respiratory protection, such as but not limited to, disposable dust masks.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.178 L02 II
- Issued
- Oct 23, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(2)(ii):The employer did not ensure that each operator had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace. a) Big Shop Area; On or about May 1, 2024, and at times prior, the employer exposed employees to struck by hazards, in that forklift operators had not successfully completed training comprised of formal instruction, practical training, and evaluation of the operator's performance.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.178 P01
- Issued
- Oct 23, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(p)(1):Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s) a) Big Shop Area; On or about May 1, 2024, and at times prior, the employer exposed employees to struck by hazards, in that a sit-down Liquid Propane forklift (Model: Caterpillar; Serial Number: 5AM05365) was not taken out of service or in safe and operative condition, as the back left and right tires had a loss of mass.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 E01
- Issued
- Oct 23, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1):Employer had not developed or implemented a written hazard communication program that included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii): a) Big Shop Area; On or about May 1, 2024, and at times prior, the employer exposed employees to chemical hazards, in that the employer did not develop a written hazard communication program on hazardous chemicals, such as but not limited to, employee information and hazard communication training.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 332323)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347449753.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.